VDI 6300 Blatt 1:2016-05
Current
The latest, up-to-date edition.
Genetic engineering operations in genetic engineering facilities - Guidance on safe operation of genetic engineering facilities
Hardcopy , PDF
German - English
05-01-2016
Preliminary note
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements applicable to technical
and analytic checks
5 Carrying out test measures
6 Measures in the event of safety-related
incidents, operating problems and
accidents (safety level 1 to safety level 3)
Annex - Inactivation kinetics
Bibliography
Defines the state of the art as regards checking safety measures and also sampling as well as analysis for the safe operation of genetic engineering facilities.
DocumentType |
Standard
|
Pages |
58
|
PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
Status |
Current
|
Supersedes |
DIN EN 1822-4:2011-01 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 4: DETERMINING LEAKAGE OF FILTER ELEMENTS (SCAN METHOD) |
DIN 10113-2:1997-07 | Determination of surface colony count on fitment and utensils in foodareas - Part 2: Semiquantitative swab method |
BGR 134 : 2004 | |
EN ISO 14698-1 : 2003 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS |
HD 60364-7-718:2013/A12:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-718: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - COMMUNAL FACILITIES AND WORKPLACES |
ZH 1/343 : 1992 | SICHERE BIOTECHNOLOGIE; BETRIEB - AUSSTATTUNG UND ORGANISATORISCHE MASSNAHMEN (B 003) |
DIN EN 13060:2015-03 | SMALL STEAM STERILIZERS |
DIN 58356-12:2000-01 | FILTER ELEMENTS - MEMBRANE FILTER ELEMENTS - PART 12: INTEGRITY TEST OF HYDROPHOBIC MEMBRANE FILTERS WITH WATER |
TRGS 522 : 2013 | |
HD 60364-5-56:2010/A12:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-56: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SAFETY SERVICES |
IEC 60364-5-56:2009 | Low-voltage electrical installations - Part 5-56: Selection and erection of electrical equipment - Safety services |
ISO 11138-3:2017 | Sterilization of health care products — Biological indicators — Part 3: Biological indicators for moist heat sterilization processes |
EN ISO 11140-3:2009 | Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (ISO 11140-3:2007, including Cor 1:2007) |
DIN 10113-1:1997-07 | Determination of surface colony count on fitment and utensils in foodareas - Part 1: Quantitative swab method |
EN 285:2015 | Sterilization - Steam sterilizers - Large sterilizers |
VDE 0105-100 : 2015 AMD 1 2017 | OPERATION OF ELECTRICAL INSTALLATIONS - PART 100: GENERAL REQUIREMENTS |
DIN EN ISO 14644-3:2006-03 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS |
DIN EN ISO 11138-3:2015-10 (Draft) | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 3: BIOLOGICAL INDICATORS FOR MOIST HEAT STERILIZATION PROCESSES (ISO 11138-3:2017) |
VDE 0100-718 : 2014 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-718: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - COMMUNAL FACILITIES AND WORKPLACES |
VDI 2083 Blatt 3:2005-07 | Cleanroom technology - Metrology and test methods |
VDI 2083 Blatt 1:2013-01 | Cleanroom technology - Particulate air cleanliness classes |
EN 1822-5:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 5: Determining the efficiency of filter elements |
EN ISO 11138-4:2017 | Sterilization of health care products - Biological indicators - Part 4: Biological indicators for dry heat sterilization processes (ISO 11138-4:2017) |
DIN EN 1422:2014-08 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
DIN EN 285:2016-05 | Sterilization - Steam sterilizers - Large sterilizers |
VDE 0100-600 : 2017-06 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 6: VERIFICATION (IEC 60364-6:2016) |
EN ISO 11138-3:2017 | Sterilization of health care products - Biological indicators - Part 3: Biological indicators for moist heat sterilization processes (ISO 11138-3:2017) |
EN ISO 14161:2009 | Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009) |
ISO 11140-3:2007 | Sterilization of health care products — Chemical indicators — Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test |
EN ISO 11138-2:2017 | Sterilization of health care products - Biological indicators - Part 2: Biological indicators for ethylene oxide sterilization processes (ISO 11138-2:2017) |
DIN EN ISO 14161:2010-03 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
EN 14180:2014 | Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
DIN EN ISO 11138-2:2015-10 (Draft) | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 2: BIOLOGICAL INDICATORS FOR ETHYLENE OXIDE STERILIZATION PROCESSES (ISO 11138-2:2017) |
PREN 285 : DRAFT 2013 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
ISO 11138-2:2017 | Sterilization of health care products — Biological indicators — Part 2: Biological indicators for ethylene oxide sterilization processes |
BGR 121 : 2004 | |
VDE 0100-560 : 2013-10 | ERRICHTEN VON NIEDERSPANNUNGSANLAGEN - TEIL 5-56: AUSWAHL UND ERRICHTUNG ELEKTRISCHER BETRIEBSMITTEL - EINRICHTUNGEN FUER SICHERHEITSZWECKE (IEC 60364-5-56:2009) |
EN 61010-2-020:2017 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges |
EN 1822-2:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics |
DIN EN ISO 17665:2004-10 (Draft) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
EN ISO 11138-1:2017 | Sterilization of health care products - Biological indicators - Part 1: General requirements (ISO 11138-1:2017) |
EN ISO 11140-1:2014 | Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014) |
ISO 11140-1:2014 | Sterilization of health care products Chemical indicators Part 1: General requirements |
ISO 14698-1:2003 | Cleanrooms and associated controlled environments Biocontamination control Part 1: General principles and methods |
IEC 60364-6:2016 | Low voltage electrical installations - Part 6: Verification |
DIN VDE 0100-718 : 2014 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-718: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - COMMUNAL FACILITIES AND WORKPLACES |
IEC 60364-7-718:2011 | Low-voltage electrical installations - Part 7-718: Requirements for special installations or locations - Communal facilities and workplaces |
VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
DIN EN 1822-1:2011-01 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 1: CLASSIFICATION, PERFORMANCE TESTING, MARKING |
TRGS 526 : 2008 | |
VDE 0411-1 : 2011 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
ISO 11140-4:2007 | Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
ISO 14644-3:2005 | Cleanrooms and associated controlled environments Part 3: Test methods |
DIN EN 1822-2:2011-01 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 2: AEROSOL PRODUCTION, MEASURING EQUIPMENT, PARTICLE COUNTING STATISTICS |
ASR A3.6 : 2012 | |
DIN EN 1822-3:2011-01 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 3: TESTING FLAT SHEET FILTER MEDIA |
DIN EN ISO 11140-4:2007-07 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) |
DIN EN 12469:2000-09 | BIOTECHNOLOGY - PERFORMANCE CRITERIA FOR MICROBIOLOGICAL SAFETY CABINETS |
IEC 61010-2-020:2016 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges |
DIN EN ISO 11140-3:2009-09 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
EN ISO 11140-4:2007 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) |
ASTM E 2458 : 2017 : REDLINE | Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents and Toxins from Nonporous Surfaces |
DIN EN ISO 11138-1:2015-10 (Draft) | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO 11138-1:2017) |
EN 1822-3:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 3: Testing flat sheet filter media |
DIN 58949-3:2012-01 | DISINFECTION - STEAM DISINFECTION APPARATUS - PART 3: EFFICIENCY TESTING |
DIN VDE 0100-600 : 2017-06 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 6: VERIFICATION (IEC 60364-6:2016) |
DIN EN 61010-1 : 2011 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
ISO 11138-1:2017 | Sterilization of health care products — Biological indicators — Part 1: General requirements |
EN 1822-1:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking |
DIN 58949-2:2014-06 | DISINFECTION - STEAM DISINFECTION APPARATUS - PART 2: REQUIREMENTS |
DIN 58951-2:2003-07 | STERILIZATION - STEAM STERILIZERS FOR LABORATORY USE - PART 2: APPARATUS REQUIREMENTS, REQUIREMENTS ON SERVICES AND INSTALLATION |
EN 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
EN ISO 17665-1:2006 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
EN 12469:2000 | Biotechnology - Performance criteria for microbiological safety cabinets |
DIN EN 1822-5:2011-01 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 5: DETERMINING THE EFFICIENCY OF FILTER ELEMENTS |
VDI 2083 Blatt 3.1:2012-06 | Cleanroom technology - Metrology in cleanroom air - Monitoring |
ISO 14161:2009 | Sterilization of health care products Biological indicators Guidance for the selection, use and interpretation of results |
BGR 500 : SEP 2008 | |
IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
ISO 11138-4:2017 | Sterilization of health care products — Biological indicators — Part 4: Biological indicators for dry heat sterilization processes |
DIN EN ISO 11138-5:2015-10 (Draft) | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 5: BIOLOGICAL INDICATORS FOR LOW-TEMPERATURE STEAM AND FORMALDEHYDE STERILIZATION PROCESSES (ISO 11138-5:2017) |
ISO 11138-5:2017 | Sterilization of health care products — Biological indicators — Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes |
DIN 12980:2016-10 | LABORATORY INSTALLATIONS - SAFETY CABINETS AND GLOVE BOXES FOR CYTOTOXIC SUBSTANCES AND OTHER CMR DRUGS |
DIN 10113-3:1997-07 | Determination of surface colony count on fitment and utensils in foodareas - Part 3: Semiquantitative method with culture media laminated taking up equipment (squeeze method) |
EN 1822-4:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 4: Determining leakage of filter elements (scan method) |
EN 1422:2014 | Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods |
DIN EN 14180:2014-09 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
EN 13060:2014 | Small steam sterilizers |
EN ISO 11138-5:2017 | Sterilization of health care products - Biological indicators - Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes (ISO 11138-5:2017) |
ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
DIN VDE 0100-560 : 2013-10 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-56: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SAFETY SERVICES (IEC 60364-5-56:2009) |
DIN EN ISO 11138-4:2015-10 (Draft) | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 4: BIOLOGICAL INDICATORS FOR DRY HEAT STERILIZATION PROCESSES (ISO 11138-4:2017) |
DIN EN ISO 11140-1:2015-03 | Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014) |
1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
EN ISO 14644-3:2005 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.