IEC 61158-2:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
03-09-2023
English - French
07-17-2014
FOREWORD
0 Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 DLL - PhL interface
6 Systems management - PhL interface
7 DCE independent sublayer (DIS)
8 DTE - DCE interface and MIS-specific functions
9 Medium dependent sublayer (MDS)
10 MDS - MAU interface
11 Types 1 and 7: Medium attachment unit: voltage mode,
linear-bus-topology 150 Omega twisted-pair wire medium
12 Types 1 and 3: Medium attachment unit: 31,25 kbit/s,
voltage-mode with low-power option, bus- and tree-topology,
100 Omega wire medium
13 Type 1: Medium attachment unit: current mode,
twisted-pair wire medium
14 Type 1: Medium attachment unit: current mode
(1 A), twisted-pair wire medium
15 Types 1 and 7: Medium attachment unit:
dual-fiber optical media
16 Type 1: Medium attachment unit: 31,25 kbit/s,
single-fiber optical medium
17 Void
18 Type 2: Medium attachment unit: 5 Mbit/s, voltage-mode,
coaxial wire medium
19 Type 2: Medium attachment unit: 5 Mbit/s, optical medium
20 Type 2: Medium attachment unit: network access port (NAP)
21 Type 3: Medium attachment unit: synchronous transmission,
31,25 kbit/s, voltage mode, wire medium
22 Type 3: Medium attachment unit: asynchronous transmission,
wire medium
23 Type 3: Medium attachment unit: asynchronous transmission,
optical medium
24 Type 4: Medium attachment unit: RS-485
25 Void
26 Void
27 Type 8: Medium attachment unit: twisted-pair wire medium
28 Type 8: Medium attachment unit: optical media
29 Type 12: Medium attachment unit: electrical medium
30 Type 16: Medium attachment unit: optical fiber medium at
2, 4, 8 and 16 Mbit/s
31 Type 18: Medium attachment unit: basic medium
32 Type 18: Medium attachment unit: powered medium
33 Type 24: Medium attachment unit: twisted-pair wire medium
34 Type 20: Medium attachment unit: FSK medium
Annex A (normative) - Type 1: Connector specification
Annex B (informative) - Types 1 and 3: Cable specifications and
trunk and spur lengths for the 31,25 kbit/s
voltage-mode MAU
Annex C (informative) - Types 1 and 7: Optical passive stars
Annex D (informative) - Types 1 and 7: Star topology
Annex E (informative) - Type 1: Alternate fibers
Annex F (normative) - Type 2: Connector specification
Annex G (normative) - Type 2: Repeater machine sublayers
(RM, RRM) and redundant PhLs
Annex H (informative) - Type 2: Reference design examples
Annex I (normative) - Type 3: Connector specification
Annex J (normative) - Type 3: Redundancy of PhL and medium
Annex K (normative) - Type 3: Optical network topology
Annex L (informative) - Type 3: Reference design examples
for asynchronous transmission, wire medium,
intrinsically safe
Annex M (normative) - Type 8: Connector specification
Annex N (normative) - Type 16: Connector specification
Annex O (normative) - Type 16: Optical network topology
Annex P (informative) - Type 16: Reference design example
Annex Q (normative) - Type 18: Connector specification
Annex R (normative) - Type 18: Media cable specifications
Annex S (normative) - Type 24: Connector specification
Annex T (informative) - Type 20: Network topology, cable
characteristics and lengths, power distribution
through barriers, and shielding and grounding
Bibliography
IEC 61158-2:2014 specifies the requirements for fieldbus component parts. It also specifies the media and network configuration requirements necessary to ensure agreed levels of data integrity before data-link layer error checking and interoperability between devices at the physical layer. The fieldbus physical layer conforms to layer 1 of the OSI 7-layer model as defined by ISO 7498 with the exception that, for some types, frame delimiters are in the physical layer while for other types they are in the data-link layer. This sixth edition cancels and replaces the fifth edition published in 2010. It constitutes a technical revision. This edition includes the following changes:
- new Type 20 specification;
- new Type 24 specification;
- RS232 media specification for Type 4 removed.
Committee |
TC 65/SC 65C
|
DevelopmentNote |
Stability date: 2018. Also available in CD-ROM format. (07/2014)
|
DocumentType |
Standard
|
Pages |
1008
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
DS EN 61158-2 : 2014 | Identical |
NEN EN IEC 61158-2 : 2014 | Identical |
PN EN 61158-2 : 2014 | Identical |
SN EN 61158-2 : 2014 | Identical |
BS EN 61158-2:2014 | Identical |
UNE-EN 61158-2:2014 | Identical |
CEI EN 61158-2 : 2015 | Identical |
EN 61158-2:2014 | Identical |
NF EN 61158-2 : 2015 | Identical |
DIN EN 61158-2:2015-02 | Identical |
PNE-FprEN 61158-2 | Identical |
NEN 11158-2 : 95 AMD 2 97 | Identical |
DIN EN 61158-3-2:2015-07 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-2: DATA-LINK LAYER SERVICE DEFINITION - TYPE 2 ELEMENTS (IEC 61158-3-2:2014) |
CEI EN 61784-3-12 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-12: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 12 |
CEI EN 61375-3-1 : 2013 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-1: MULTIFUNCTION VEHICLE BUS (MVB) |
BS DD238-2(1996) : 1996 | FIELDBUS - SPECIFICATION FOR 31.25 KBIT/S - PHYSICAL LAYER PROFILE |
BS EN 61800-7-202:2016 | Adjustable speed electrical power drive systems Generic interface and use of profiles for power drive systems. Profile type 2 specification |
DIN EN 61158-4-7:2008-09 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-7: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 7 ELEMENTS |
PD IEC/PAS 62953:2015 | Industrial communication networks. Fieldbus specifications |
CEI CLC/TR 62453-502 : 2011 | FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION - PART 502: COMMUNICATION IMPLEMENTATION FOR COMMON OBJECT MODEL - IEC 61784 CPF 2 |
BS EN 61158-3-18:2008 | Industrial communication networks. Fieldbus specifications Data-link layer service definition. Type 18 elements |
12/30264901 DC : 0 | BS EN 61158-1 - INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 1: OVERVIEW AND GUIDANCE FOR THE IEC 61158 AND IEC 61784 SERIES |
BS EN 61158-3-20:2014 | Industrial communication networks. Fieldbus specifications Data-link layer service definition. Type 20 elements |
BS EN 61158-4-1:2014 | Industrial communication networks. Fieldbus specifications Data-link layer protocol specification. Type 1 elements |
CLC/TS 62603-1:2014 | Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications |
DIN EN 61158-5-8:2008-09 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 5-8: APPLICATION LAYER SERVICE DEFINITION - TYPE 8 ELEMENTS |
BS EN 61158-3-1:2014 | Industrial communication networks. Fieldbus specifications Data-link layer service definition. Type 1 elements |
BS EN 61158-3-3:2014 | Industrial communication networks. Fieldbus specifications Data-link layer service definition. Type 3 elements |
BS EN 61158-5-8:2008 | Industrial communication networks. Fieldbus specifications Application layer service definition. Type 8 elements |
CEI EN 61784-3-8 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-8: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 8 |
BS EN 61158-1:2014 | Industrial communication networks. Fieldbus specifications Overview and guidance for the IEC 61158 and IEC 61784 series |
DIN EN 61784-1:2015-02 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELDBUS PROFILES (IEC 61784-1:2014) |
CEI EN 61158-4-8 : 2008 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-8: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 8 ELEMENTS |
08/30191166 DC : DRAFT OCT 2008 | BS EN 60079-25 - EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE SYSTEMS |
CEI EN 60079-27 : 2010 | EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) |
I.S. EN 61158-3-3:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-3: DATA-LINK LAYER SERVICE DEFINITION - TYPE 3 ELEMENTS |
EN 61326-2-5:2013 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1 |
DIN EN 61158-4-1:2015-09 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-1: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 1 ELEMENTS (IEC 61158-4-1:2014) |
ISA 62453-306 : 2011 | FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION - PART 306: COMMUNICATION PROFILE INTEGRATION - IEC 61784 CPF 6 |
BS EN 61784-3-8:2010 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 8 |
14/30279256 DC : 0 | BS EN 61800-7-303 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-303: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - MAPPING OF PROFILE TYPE 3 TO NETWORK TECHNOLOGIES |
CEI EN 61158-4-20 : 2016 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-20: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 20 ELEMENTS |
03/313403 DC : DRAFT SEP 2003 | IEC 60079-27 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) AND FIELDBUS NON-INCENDIVE CONCEPT (FNICO) |
09/30205326 DC : 0 | BS EN 61784-3:2009+A1 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES (CPF 18) - AMENDMENT 1 |
BIS IS/IEC 60079-25 : 2010 | EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS |
EN 61784-3-3:2017 | Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3 |
I.S. EN 61158-4-12:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-12: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 12 ELEMENTS |
IEEE 1242-1999 | IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants |
CEI EN 62453-302 : 2011 | FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION - PART 302: COMMUNICATION PROFILE INTEGRATION - IEC 61784 CPF 2 |
CEI EN 61158-4-16 : 2008 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-16: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 16 ELEMENTS |
I.S. EN 61158-4-24:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-24: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 24 ELEMENTS |
CEI EN 61784-1 : 2016 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELDBUS PROFILES |
I.S. EN 61784-3-17:2017 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-17: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 17 |
I.S. EN 61800-7-202:2016 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-202: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - PROFILE TYPE 2 SPECIFICATION |
I.S. EN 61158-4-2:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-2: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 2 ELEMENTS |
I.S. EN 61158-6-10:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 6-10: APPLICATION LAYER PROTOCOL SPECIFICATION - TYPE 10 ELEMENTS |
IEC PAS 62453-3:2006 | Field Device Tool (FDT) Interface specification - Part 3: PROFIBUS communication |
I.S. EN 15714-2:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
CEI EN 61158-5-21 : 2013 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 5-21: APPLICATION LAYER SERVICE DEFINITION - TYPE 21 ELEMENTS |
I.S. EN 61784-1:2014 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELDBUS PROFILES |
CSA C22.2 No. 60079-25 : 2014 | EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS |
I.S. EN 61326-2-5:2013 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 2-5: PARTICULAR REQUIREMENTS - TEST CONFIGURATIONS, OPERATIONAL CONDITIONS AND PERFORMANCE CRITERIA FOR DEVICES WITH FIELD BUS INTERFACES ACCORDING TO IEC 61784-1 (IEC 61326-2-5:2012 (EQV)) |
BS EN 61158-3-4:2014 | Industrial communication networks. Fieldbus specifications Data-link layer service definition. Type 4 elements |
BS EN 61158-4-2:2014 | Industrial communication networks. Fieldbus specifications Data-link layer protocol specification. Type 2 elements |
NF EN 61158-4-1 : JUL 2015 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-1: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 1 ELEMENTS |
IEC 61158-4-18:2010 | Industrial communication networks - Fieldbus specifications - Part 4-18: Data-link layer protocol specification - Type 18 elements |
BS EN 50174-2 : 2009 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
IEC 61158-3-18:2007 | Industrial communication networks - Fieldbus specifications - Part 3-18: Data-link layer service definition - Type 18 elements |
IEC 61800-7-304:2015 | Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies |
IEC 61158-3-2:2014 | Industrial communication networks - Fieldbus specifications - Part 3-2: Data-lonk layer service definition - Type 2 elements |
EN 61800-7-304:2016 | Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies |
EN 61158-4-4:2014 | Industrial communication networks - Fieldbus specifications - Part 4-4: Data-link layer protocol specification - Type 4 elements |
EN 61158-5-2:2014 | Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements |
EN 60079-25:2010/AC:2013 | EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010) |
EN 61158-3-7:2008 | Industrial communication networks - Fieldbus specifications - Part 3-7: Data-link layer service definition - Type 7 elements |
EN 61158-3-20:2014 | Industrial communication networks - Fieldbus specifications - Part 3-20: Data-link layer service definition - Type 20 elements |
EN 61158-5-12:2014 | Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements |
EN 61158-4-1:2014 | Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements |
EN 61158-3-4:2014 | Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elements |
EN 13149-1:2004 | Public transport - Road vehicle scheduling and control systems - Part 1: WORLDFIP definition and application rules for onboard data transmission |
EN IEC 62453-303-1:2009/A1:2018 | FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION - PART 303-1: COMMUNICATION PROFILE INTEGRATION - IEC 61784 CP 3/1 AND CP 3/2 (IEC 62453-303-1:2009/A1:2016) |
EN 61158-4-3:2014 | Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specification - Type 3 elements |
EN 61158-4-21:2012 | Industrial communication networks - Fieldbus specifications - Part 4-21: Data-link layer protocol specification - Type 21 elements |
EN 61158-5-10:2014 | Industrial communication networks - Fieldbus specifications - Part 5-10: Application layer service definition - Type 10 elements |
EN 61784-3-1:2010 | Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1 |
EN 61158-4-18:2012 | Industrial communication networks - Fieldbus specifications - Part 4-18: Data-link layer protocol specification - Type 18 elements |
EN 61784-3-6:2010 | Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6 |
EN 61784-3-14:2010 | Industrial communication networks - Profiles - Part 3-14: Functional safety fieldbuses - Additional specifications for CPF 14 |
EN 61158-5-8:2008 | Industrial communication networks - Fieldbus specifications - Part 5-8: Application layer service definition - Type 8 elements |
EN 61158-4-24:2014 | Industrial communication networks - Fieldbus specifications - Part 4-24: Data-link layer protocol specification - Type 24 elements |
EN 61158-4-12:2014 | Industrial communication networks - Fieldbus specifications - Part 4-12: Data-link layer protocol specification - Type 12 elements |
EN 60079-27:2008 | Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) |
EN 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
EN 62591:2016 | Industrial communication networks - Wireless communication network and communication profiles - WirelessHART™ |
BS EN 61158-4-4:2014 | Industrial communication networks. Fieldbus specifications Data-link layer protocol specification. Type 4 elements |
UNE-EN 50463-4:2013 | Railway applications - Energy measurement on board trains - Part 4: Communication |
DIN EN 61158-3:2005-05 | DIGITAL DATA COMMUNICATION FOR MEASUREMENT AND CONTROL - FIELDBUS FOR USE IN INDUSTRIAL CONTROL SYSTEMS - PART 3: DATA LINK SERVICE DEFINITION |
BS EN 61158-3-2:2014 | Industrial communication networks. Fieldbus specifications Data-link layer service definition. Type 2 elements |
API 554-1 : 2008(R2016) | PROCESS CONTROL SYSTEMS - PART 1: PROCESS CONTROL SYSTEMS FUNCTIONS AND FUNCTIONAL SPECIFICATION DEVELOPMENT |
PD IEC/TR 61491:2010 | Electrical equipment of industrial machines. Serial data link for real-time communication between controls and drives |
BS EN 50463-4:2017 | Railway applications. Energy measurement on board trains Communication |
DIN EN 61158-3-18:2008-09 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-18: DATA-LINK LAYER SERVICE DEFINITION - TYPE 18 ELEMENTS |
DIN EN 61158-3-3:2015-07 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-3: DATA-LINK LAYER SERVICE DEFINITION - TYPE 3 ELEMENTS (IEC 61158-3-3:2014) |
BS EN 61158-4-21:2012 | Industrial communication networks. Fieldbus specifications Data-link layer protocol specification. Type 21 elements |
DIN EN 61158-4-4:2015-09 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-4: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 4 ELEMENTS (IEC 61158-4-4:2014) |
NF EN 61158-4-20 : 2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-20: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 20 ELEMENTS |
DIN EN 61158-4:2005-05 | DIGITAL DATA COMMUNICATION FOR MEASUREMENT AND CONTROL - FIELD BUS FOR USE IN INDUSTRIAL CONTROL SYSTEMS - PART 4: DATA LINK PROTOCOL SPECIFICATION |
DIN EN 61158-4-3:2015-09 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-3: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 3 ELEMENTS (IEC 61158-4-3:2014) |
DIN EN 61158-3-8:2008-09 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-8: DATA-LINK LAYER SERVICE DEFINITION - TYPE 8 ELEMENTS |
EN 61800-2:2015 | Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems |
PD CLC/TR 61158-1:2010 | Industrial communication networks. Fieldbus specifications Overview and guidance for the IEC 61158 and IEC 61784 series |
CEI EN 61158-6-10 : 2016 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 6-10: APPLICATION LAYER PROTOCOL SPECIFICATION - TYPE 10 ELEMENTS |
PD CLC/TS 62603-1:2014 | Industrial process control systems. Guideline for evaluating process control systems Specifications |
I.S. EN 60079-27:2008 | EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) |
DIN EN 61158-4-8:2008-09 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-8: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 8 ELEMENTS |
BS EN 60079-27:2008 | Explosive atmospheres Fieldbus intrinsically safe concept (FISCO) |
BS EN 62453-306:2009 | Field device tool (FDT) interface specification Communication profile integration. IEC 61784 CPF 6 |
BS EN 15714-2:2009 | Industrial valves. Actuators Electric actuators for industrial valves. Basic requirements |
12/30265473 DC | BS EN 61158-4. ndustrial communication networks. Fieldbus specifications. Part 4-1. Data-link layer protocol specification. Type 1 elements. Part 4-2. Data-link layer protocol specification. Type 2 elements. Part 4-3. Data-link layer protocol specification. Type 3 elements. Part 4-4. Data-link layer protocol specification. Type 4 elements. Part 4-11. Data-link layer protocol specification. Type 11 elements. Par |
BS EN 61158-4-16:2008 | Industrial communication networks. Fieldbus specifications Data-link layer protocol specification. Type 16 elements |
CEI EN 61784-3-6 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-6: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 6 |
CEI EN 61158-3-16 : 2008 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-16: DATA-LINK LAYER SERVICE DEFINITION - TYPE 16 ELEMENTS |
ISA 60079-27 : 2006 | FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) AND FIELDBUS NON-INCENDIVE CONCEPT (FNICO) |
BS EN 61784-3-1:2010 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 1 |
15/30329552 DC : 0 | BS EN 50463-4 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 4: COMMUNICATION |
I.S. EN 62453-303-1:2009 | FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION - PART 303-1: COMMUNICATION PROFILE INTEGRATION - IEC 61784 CP 3/1 AND CP 3/2 |
EN 50174-2 : 2009 AMD 2 2014 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
IEC TR 62453-51-20:2017 | Field device tool (FDT) interface specification - Part 51-20: Communication implementation for common object model - IEC 61784 CPF 2 |
NF EN 61784-2 : APR 2015 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 2: ADDITIONAL FIELDBUS PROFILES FOR REAL-TIME NETWORKS BASED ON ISO/IEC 8802-3 |
I.S. EN 61158-4-4:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-4: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 4 ELEMENTS |
I.S. EN 61158-3-12:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-12: DATA-LINK LAYER SERVICE DEFINITION - TYPE 12 ELEMENTS |
CEI EN 60079-25 : 2012 | EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS |
I.S. EN 61158-5-21:2012 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 5-21: APPLICATION LAYER SERVICE DEFINITION - TYPE 21 ELEMENTS (IEC 61158-5-21:2010 (EQV)) |
CEI EN 61131-9 : 2014 | PROGRAMMABLE CONTROLLERS - PART 9: SINGLE-DROP DIGITAL COMMUNICATION INTERFACE FOR SMALL SENSORS AND ACTUATORS (SDCI) |
IEC PAS 62407:2005 | Real-time Ethernet control automation technology (EtherCATTM) |
BS EN 61158-6-10:2014 | Industrial communication networks. Fieldbus specifications Application layer protocol specification. Type 10 elements |
IEC 61784-3-12:2010 | Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 12 |
I.S. EN 61158-5-10:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 5-10: APPLICATION LAYER SERVICE DEFINITION - TYPE 10 ELEMENTS |
IEC PAS 62406:2005 | Real-time Ethernet TCnet (Time-Critical Control Network) |
IEC 61800-2:2015 | Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems |
I.S. EN 50128:2011 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
I.S. EN 60079-11:2012 | EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I' |
I.S. EN 61918:2013 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES |
DIN EN 61158-4-12:2015-09 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-12: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 12 ELEMENTS (IEC 61158-4-12:2014) |
BS EN 50128:2011 | Railway applications. Communication, signalling and processing systems. Software for railway control and protection systems |
CLC/TR 62453-502:2009 | Field device tool (FDT) interface specification - Part 502: Communication implementation for common object model - IEC 61784 CPF 2 |
BS EN 13149-2:2004 | Public transport. Road vehicle scheduling and control systems WORLDFIP cabling specifications |
14/30279234 DC : 0 | BS EN 61800-7-202 ED 2.0 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-202: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - PROFILE TYPE 2 SPECIFICATION |
I.S. EN 50174-2:2009 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
14/30279278 DC : 0 | BS EN 61800-7-304 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-304: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - MAPPING OF PROFILE TYPE 4 TO NETWORK TECHNOLOGIES |
12/30265477 DC : 0 | BS EN 61158-5-X - INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 5-X: APPLICATION LAYER SERVICE DEFINITION - TYPE X ELEMENTS |
11/30213792 DC : 0 | BS EN 50463-4 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 4: COMMUNICATION |
BS EN 61158-3-8:2008 | Industrial communication networks. Fieldbus specifications Data-link layer service definition. Type 8 elements |
NF EN 61158-3-21 : 2013 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-21: DATA-LINK LAYER SERVICE DEFINITION - TYPE 21 ELEMENTS |
BS EN 61158-4-20:2014 | Industrial communication networks. Fieldbus specifications Data-link layer protocol specification. Type 20 elements |
DIN EN 61158-3-4:2015-07 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-4: DATA-LINK LAYER SERVICE DEFINITION - TYPE 4 ELEMENTS (IEC 61158-3-4:2014) |
I.S. EN 61158-3:2004 | DIGITAL DATA COMMUNICATION FOR MEASUREMENT AND CONTROL - FIELDBUS FOR USE IN INDUSTRIAL CONTROL SYSTEMS - PART 3: DATA LINK SERVICE DEFINITION |
BS EN 61158-3-16:2008 | Industrial communication networks. Fieldbus specifications Data-link layer service definition. Type 16 elements |
BS EN 61326-2-5:2013 | Electrical equipment for measurement, control and laboratory use. EMC requirements Particular requirements. Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1 |
09/30205454 DC : 0 | BS EN 61375-3-1 - ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK - PART 3-1: MVB - MULTIPURPOSE VEHICLE BUS |
CEI EN 61158-5-8 : 2009 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 5-8: APPLICATION LAYER SERVICE DEFINITION - TYPE 8 ELEMENTS |
BS EN 61158-4:2004 | Fieldbus standard for use in industrial control systems Data link protocol specification |
CEI EN 61158-3-21 : 2013 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-21: DATA-LINK LAYER SERVICE DEFINITION - TYPE 21 ELEMENTS |
IEC TS 60079-27:2002 | Electrical apparatus for explosive gas atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) |
BS EN 62453-303-1 : 2009 | FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION - PART 303-1: COMMUNICATION PROFILE INTEGRATION - IEC 61784 CP 3/1 AND CP 3/2 |
CEI EN 50463-4 : 2013 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 4: COMMUNICATION |
DIN EN 61158-5-12:2015-09 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 5-12: APPLICATION LAYER SERVICE DEFINITION - TYPE 12 ELEMENTS (IEC 61158-5-12:2014) |
13/30248785 DC : 0 | BS EN 61800-2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 2: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE FREQUENCY A.C. POWER DRIVE SYSTEMS |
BS EN 61800-7-304:2016 | Adjustable speed electrical power drive systems Generic interface and use of profiles for power drive systems. Mapping of profile type 4 to network technologies |
BS EN 61784-3-2:2017 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 2 |
I.S. EN 61158-3-1:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-1: DATA-LINK LAYER SERVICE DEFINITION - TYPE 1 ELEMENTS |
07/30152812 DC : DRAFT AUG 2007 | BS EN 50174-2 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
BS EN 61375-3-1:2012 | Electronic railway equipment. Train communication network (TCN) Multifunction Vehicle Bus (MVB) |
NF EN 61326-2-5 : 2013 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 2-5: PARTICULAR REQUIREMENTS - TEST CONFIGURATIONS, OPERATIONAL CONDITIONS AND PERFORMANCE CRITERIA FOR DEVICES WITH FIELD BUS INTERFACES ACCORDING TO IEC 61784-1 |
EN 61784-3-8:2017 | Industrial communication networks - Profiles - Part 3-8: Functional safety fieldbuses - Additional specifications for CPF 8 |
I.S. EN 61158-1:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 1: OVERVIEW AND GUIDANCE FOR THE IEC 61158 AND IEC 61784 SERIES |
CEI EN 62591 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - WIRELESS COMMUNICATION NETWORK AND COMMUNICATION PROFILES - WIRELESSHART(TM) |
IEC 62453-302:2016 | Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2 |
I.S. EN 61158-3-2:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-2: DATA-LINK LAYER SERVICE DEFINITION - TYPE 2 ELEMENTS |
BS EN 61784-1:2014 | Industrial communication networks. Profiles Fieldbus profiles |
CEI EN 61158-4-24 : 2016 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-24: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 24 ELEMENTS |
NF EN 60079-25 : 2011 | EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS |
I.S. EN 61784-3-3:2017 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-3: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 3 |
I.S. EN 61158-4-7:2008 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-7: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 7 ELEMENTS |
I.S. EN 61158-4-16:2008 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-16: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 16 ELEMENTS |
I.S. EN 61784-3-6:2010 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-6: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 6 |
CEI EN 62453-301 : 2010 | FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION - PART 301: COMMUNICATION PROFILE INTEGRATION - IEC 61784 CPF 1 |
I.S. EN 61158-4-1:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-1: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 1 ELEMENTS |
I.S. EN 61158-3-20:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-20: DATA-LINK LAYER SERVICE DEFINITION - TYPE 20 ELEMENTS |
IEC 62453-303-1:2009+AMD1:2016 CSV | Field device tool (FDT) interface specification - Part 303-1: Communication profile integration - IEC 61784 CP 3/1 and CP 3/2 |
I.S. EN 62453-301:2009 | FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION - PART 301: COMMUNICATION PROFILE INTEGRATION - IEC 61784 CPF 1 |
ISA 62453-303-1 : 2011 | FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION - PART 303-1: COMMUNICATION PROFILE INTEGRATION - IEC 61784 CP 3/1 AND CP 3/2 |
BS EN 61158-4-12:2014 | Industrial communication networks. Fieldbus specifications Data-link layer protocol specification. Type 12 elements |
I.S. EN 62453-306:2009 | FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION - PART 306: COMMUNICATION PROFILE INTEGRATION - IEC 61784 CPF 6 |
CEI EN 61784-3-14 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-14: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 14 |
CEI EN 61158-4-1 : 2016 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-1: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 1 ELEMENTS |
IEC 62279:2015 | Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems |
IEC 61784-3-2:2016 | Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2 |
CEI EN 62453-303-1 : 2011 | FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION - PART 303-1: COMMUNICATION PROFILE INTEGRATION - IEC 61784 CP 3/1 AND CP 3/2 |
EN 61784-3-12:2010 | Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 12 |
IEC TR 61158-1:2010 | Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series |
IEC PAS 62453-5:2006 | Field Device Tool (FDT) interface specification - Part 5: FOUNDATION FIELDBUS communication |
IEC 61918:2013 | Industrial communication networks - Installation of communication networks in industrial premises |
IEEE 45.8-2016 | IEEE Recommended Practice for Electrical Installations on Shipboard--Cable Systems |
IEC 60079-11:2011 RLV | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
IEC 61158-3:2003 | Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 3: Data link service definition |
IEC 61784-3-6:2010 | Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6 |
IEC 61158-3-1:2014 | Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elements |
IEC 61326-2-5:2012 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1 |
IEC 61158-4-12:2014 | Industrial communication networks - Fieldbus specifications - Part 4-12: Data-link layer protocol specification - Type 12 elements |
IEC 60079-11 REDLINE : 6.0 | EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I' |
IEC 61158-4-21:2010 | Industrial communication networks - Fieldbus specifications - Part 4-21: Data-link layer protocol specification - Type 21 elements |
UNE-EN 60079-11:2013 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
IEC 61158-4-16:2007 | Industrial communication networks - Fieldbus specifications - Part 4-16: Data-link layer protocol specification - Type 16 elements |
IEC 61158-3-20:2014 | Industrial communication networks - Fieldbus specifications - Part 3-20: Data-link layer service definition - Type 20 elements |
EN 61800-7-302:2016 | Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies |
EN 61158-4-20:2014 | Industrial communication networks - Fieldbus specifications - Part 4-20: Data-link layer protocol specification - Type 20 elements |
CEI EN 61784-3-2 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-2: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 2 |
I.S. EN 61158-4-3:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-3: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 3 ELEMENTS |
NF EN 61158-4-3 : JUN 2015 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-3: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 3 ELEMENTS |
DIN EN 61158-4-2:2015-09 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-2: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 2 ELEMENTS (IEC 61158-4-2:2014) |
DIN EN 61158-3-1:2015-07 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-1: DATA-LINK LAYER SERVICE DEFINITION - TYPE 1 ELEMENTS (IEC 61158-3-1:2014) |
ISA 62453-301 : 2011 | FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION - PART 301: COMMUNICATION PROFILE INTEGRATION - IEC 61784 CPF 1 |
BS EN 61800-7-303:2016 | Adjustable speed electrical power drive systems Generic interface and use of profiles for power drive systems. Mapping of profile type 3 to network technologies |
EN 15714-2:2009 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
DIN EN 61158-5-2:2015-09 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 5-2: APPLICATION LAYER SERVICE DEFINITION - TYPE 2 ELEMENTS (IEC 61158-5-2:2014) |
PD CLC/TR 62453-502:2009 | Field device tool (FDT) interface specification Communication implementation for common object model. IEC 61784 CPF 2 |
BS EN 62453-301:2009 | Field device tool (FDT) interface specification Communication profile integration. IEC 61784 CPF 1 |
BS EN 61158-4-8:2008 | Industrial communication networks. Fieldbus specifications Data-link layer protocol specification. Type 8 elements |
CEI EN 61784-3-3 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-3: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 3 |
12/30265437 DC : 0 | BS EN 61158-3-X - INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-X: DATA-LINK LAYER SERVICE DEFINITION - TYPE X ELEMENTS |
12/30264885 DC : 0 | BS EN 61784-1 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELDBUS PROFILES |
I.S. EN 61784-3-12:2010 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-12: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 12 |
S.R. CLC/TR 61158-1:2010 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 1: OVERVIEW AND GUIDANCE FOR THE IEC 61158 AND IEC 61784 SERIES |
UNI EN 15714-2 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
I.S. EN 61158-3-16:2008 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-16: DATA-LINK LAYER SERVICE DEFINITION - TYPE 16 ELEMENTS |
BS EN 61800-7-302:2016 | Adjustable speed electrical power drive systems Generic interface and use of profiles for power drive systems. Mapping of profile type 2 to network technologies |
BS EN 61158-5-2:2014 | Industrial communication networks. Fieldbus specifications Application layer service definition. Type 2 elements |
BS EN 61784-3-6:2010 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 6 |
BS EN 61158-4-18:2012 | Industrial communication networks. Fieldbus specifications Data-link layer protocol specification. Type 18 elements |
DIN EN 61158-4-16:2008-09 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-16: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 16 ELEMENTS |
13/30294110 DC : 0 | BS EN 61784-3-X ED 1.0 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-X: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF X |
CEI EN 61158-3-18 : 2008 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-18: DATA-LINK LAYER SERVICE DEFINITION - TYPE 18 ELEMENTS |
BS EN 61158-3-7:2008 | Industrial communication networks. Fieldbus specifications Data-link layer service definition. Type 7 elements |
08/30179977 DC : DRAFT MAR 2008 | BS EN 62453-302 - FIELD DEVICE TOOL INTERFACE SPECIFICATION - PART 302: COMMUNICATION PROFILE INTEGRATION - IEC 61784 CPF 2 |
CEI EN 61158-3-8 : 2008 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-8: DATA-LINK LAYER SERVICE DEFINITION - TYPE 8 ELEMENTS |
BS EN 61800-2:2015 | Adjustable speed electrical power drive systems General requirements. Rating specifications for low voltage adjustable speed a.c. power drive systems |
08/30176210 DC : DRAFT MAY 2008 | BS EN 61784-3 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELD BUSES |
BS PD IEC/TS 62603-1 : 2014 | INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS |
BS EN 61158-4-7:2008 | Industrial communication networks. Fieldbus specifications Data-link layer protocol specification. Type 7 elements |
DIN EN 61158-5-10:2015-09 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 5-10: APPLICATION LAYER SERVICE DEFINITION - TYPE 10 ELEMENTS (IEC 61158-5-10:2014) |
I.S. EN 61158-4-20:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-20: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 20 ELEMENTS |
CEI EN 61784-3-1 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-1: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 1 |
06/30149534 DC : DRAFT APR 2006 | IEC 60079-27 - EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) |
NF EN 13149-2 : 2005 | PUBLIC TRANSPORT - ROAD VEHICLE SCHEDULING AND CONTROL SYSTEMS - PART 2: WORLDFIP CABLING SPECIFICATIONS |
BS EN 61158-4-24:2014 | Industrial communication networks. Fieldbus specifications Data-link layer protocol specification. Type 24 elements |
UNE-EN 60079-25:2017 | Explosive atmospheres -- Part 25: Intrinsically safe electrical systems |
NF EN 61158-5-21 : 2013 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 5-21: APPLICATION LAYER SERVICE DEFINITION - TYPE 21 ELEMENTS |
EN 61784-3-17:2017 | Industrial communication networks - Profiles - Part 3-17: Functional safety fieldbuses - Additional specifications for CPF 17 |
CEI EN 62439-2 : 2011 | INDUSTRIAL COMMUNICATION NETWORKS - HIGH AVAILABILITY AUTOMATION NETWORKS - PART 2: MEDIA REDUNDANCY PROTOCOL (MRP) |
DIN EN 61158-3-7:2008-09 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-7: DATA-LINK LAYER SERVICE DEFINITION - TYPE 7 ELEMENTS |
UNE-EN 50128:2012 | Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems |
I.S. EN 61158-3-21:2012 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-21: DATA-LINK LAYER SERVICE DEFINITION - TYPE 21 ELEMENTS (IEC 61158-3-21:2010 (EQV)) |
I.S. EN 61158-5-12:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 5-12: APPLICATION LAYER SERVICE DEFINITION - TYPE 12 ELEMENTS |
I.S. EN 61158-5-2:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 5-2: APPLICATION LAYER SERVICE DEFINITION - TYPE 2 ELEMENTS |
I.S. EN 61784-3-1:2010 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-1: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 1 |
IEC TR 62453-502:2009 | Field device tool (FDT) interface specification - Part 502: Communication implementation for common object model - IEC 61784 CPF 2 |
I.S. EN 61158-4-21:2012 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-21: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 21 ELEMENTS (IEC 61158-4-21:2010 (EQV)) |
CEI EN 61158-4-21 : 2013 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-21: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 21 ELEMENTS |
I.S. EN 61158-3-8:2008 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-8: DATA-LINK LAYER SERVICE DEFINITION - TYPE 8 ELEMENTS |
CLC/TR 61158-1:2010 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 1: OVERVIEW AND GUIDANCE FOR THE IEC 61158 AND IEC 61784 SERIES |
I.S. EN 61784-3-14:2010 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-14: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 14 |
CLC/TR 61491:2010 | Electrical equipment of industrial machines - Serial data link for real-time communication between controls and drives |
CEI EN 61158-4-18 : 2013 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-18: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 18 ELEMENTS |
I.S. EN 61784-2:2014 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 2: ADDITIONAL FIELDBUS PROFILES FOR REAL-TIME NETWORKS BASED ON ISO/IEC 8802-3 |
I.S. EN 61158-5-8:2008 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 5-8: APPLICATION LAYER SERVICE DEFINITION - TYPE 8 ELEMENTS |
IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
IEC TS 62603-1:2014 | Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications |
S.R. CLC/TR 62453-502:2009 | FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION - PART 502: COMMUNICATION IMPLEMENTATION FOR COMMON OBJECT MODEL - IEC 61784 CPF 2 |
I.S. EN 61784-3-2:2017 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-2: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 2 |
I.S. EN 61800-7-304:2016 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-304: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - MAPPING OF PROFILE TYPE 4 TO NETWORK TECHNOLOGIES |
I.S. EN 62591:2016 | INDUSTRIAL COMMUNICATION NETWORKS - WIRELESS COMMUNICATION NETWORK AND COMMUNICATION PROFILES - WIRELESSHART[TM] |
IEC 61784-3-8:2016 | Industrial communication networks - Profiles - Part 3-8: Functional safety fieldbuses - Additional specifications for CPF 8 |
IEC PAS 62412:2005 | Real-time Ethernet P-NET on IP specification |
IEC 61800-7-303:2015 | Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies |
IEC 61158-5-10:2014 | Industrial communication networks - Fieldbus specifications - Part 5-10: Application layer service definition - Type 10 elements |
IEC 61158-3-21:2010 | Industrial communication networks - Fieldbus specifications - Part 3-21: Data-link layer service definition - Type 21 elements |
IEC 62453-301:2009+AMD1:2016 CSV | Field device tool (FDT) interface specification - Part 301:Communication profile integration - IEC 61784 CPF 1 |
IEC 61158-5-8:2007 | Industrial communication networks - Fieldbus specifications - Part 5-8: Application layer service definition - Type 8 elements |
IEC 61158-3-16:2007 | Industrial communication networks - Fieldbus specifications - Part 3-16: Data-link layer service definition - Type 16 elements |
BS EN 60079-11:2012 | Explosive atmospheres Equipment protection by intrinsic safety \'i\' |
BS EN 61918:2013 | Industrial communication networks. Installation of communication networks in industrial premises |
IEC 61375-3-1:2012 | Electronic railway equipment - Train communication network (TCN) - Part 3-1: Multifunction Vehicle Bus (MVB) |
IEC 61158-3-8:2007 | Industrial communication networks - Fieldbus specifications - Part 3-8: Data-link layer service definition - Type 8 elements |
IEC 60079-27:2008 | Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) |
IEC 61158-4:2003 | Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data link protocol specification |
IEC 60079-25:2010 | Explosive atmospheres - Part 25: Intrinsically safe electrical systems |
IEC 61158-4-1:2014 | Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements |
IEC 62453-306:2009 | Field device tool (FDT) interface specification - Part 306: Communication profile integration - IEC 61784 CPF 6 |
17/30361391 DC : 0 | BS EN 50174-2 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
08/30175787 DC : DRAFT JAN 2008 | BS EN 60079-11 - EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY "I" |
IEC 61784-2:2014 | Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 |
IEC 61158-5-2:2014 | Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements |
IEC 61158-5-21:2010 | Industrial communication networks - Fieldbus specifications - Part 5-21: Application layer service definition - Type 21 elements |
IEC 61131-9:2013 | Programmable controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) |
IEC 61158-3-3:2014 | Industrial communication networks - Fieldbus specifications - Part 3-3: Data-link layer service definition - Type 3 elements |
IEC 61800-7-302:2015 | Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies |
IEC 62591:2016 | Industrial networks - Wireless communication network and communication profiles - WirelessHART<sup>TM</sup> |
BS EN 13149-1:2004 | Public transport. Road vehicle scheduling and control systems WORLDFIP definition and application rules for onboard-data transmission |
IEC 61800-7-202:2015 | Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification |
IEC 61158-4-20:2014 | Industrial communication networks - Fieldbus specifications - Part 4-20: Data-link layer protocol specification - Type 20 elements |
IEC 61158-3-7:2007 | Industrial communication networks - Fieldbus specifications - Part 3-7: Data-link layer service definition - Type 7 elements |
EN 61158-3-8:2008 | Industrial communication networks - Fieldbus specifications - Part 3-8: Data-link layer service definition - Type 8 elements |
GOST R 52350.27 : 2005 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) AND FIELDBUS NON-INCENDIVE CONCEPT (FNICO) |
CEI EN 61784-2 : 2016 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 2: ADDITIONAL FIELDBUS PROFILES FOR REAL-TIME NETWORKS BASED ON ISO/IEC 8802-3 |
BS EN 61158-3:2004 | Digital data communications for measurement and control. Fieldbus for use in industrial control systems Data link service definition |
PREN 50128 : DRAFT 2009 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
I.S. EN 61800-7-302:2016 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-302: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - MAPPING OF PROFILE TYPE 2 TO NETWORK TECHNOLOGIES |
09/30180884 DC : 0 | BS EN 50128 - RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
I.S. EN 60079-25:2010 | EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010 (EQV)) |
BS EN 61131-9:2013 | Programmable controllers Single-drop digital communication interface for small sensors and actuators (SDCI) |
ISA 62453-302 : 2011 | FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION - PART 302: COMMUNICATION PROFILE INTEGRATION - IEC 61784 CPF 2 |
BS EN 60079-25:2010 | Explosive atmospheres Intrinsically safe electrical systems |
CEI CLC/TR 61491 : 2012 | ELECTRICAL EQUIPMENT OF INDUSTRIAL MACHINES - SERIAL DATA LINK FOR REAL-TIME COMMUNICATION BETWEEN CONTROLS AND DRIVES |
I.S. EN 61158-4-8:2008 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-8: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 8 ELEMENTS |
BS EN 61784-3-12:2010 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 12 |
I.S. EN 61158-3-4:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-4: DATA-LINK LAYER SERVICE DEFINITION - TYPE 4 ELEMENTS |
PREN 50126-5 : DRAFT 2012 | RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 5: FUNCTIONAL SAFETY - SOFTWARE |
DIN EN 61158-6-10:2015-09 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 6-10: APPLICATION LAYER PROTOCOL SPECIFICATION - TYPE 10 ELEMENTS (IEC 61158-6-10:2014) |
BS EN 61158-3-12:2014 | Industrial communication networks. Fieldbus specifications Data-link layer service definition. Type 12 elements |
S.R. CLC/TS 62603-1:2014 | INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS |
CEI EN 61158-3-7 : 2008 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-7: DATA-LINK LAYER SERVICE DEFINITION - TYPE 7 ELEMENTS |
IEC 61784-3-3:2016 | Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3 |
PREN 50463-4 : DRAFT 2015 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 4: COMMUNICATION |
05/30133337 DC : DRAFT MAY 2005 | IEC 61375-1 - ELECTRIC RAILWAY EQUIPMENT - TRAIN BUS - PART 1: TRAIN COMMUNICATION NETWORK |
BS EN 61784-3-14:2010 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 14 |
14/30279252 DC : 0 | BS EN 61800-7-302 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-302: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - MAPPING OF PROFILE TYPE 2 TO NETWORK TECHNOLOGIES |
BS EN 61784-3-3:2017 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 3 |
EN 50463-4:2017 | Railway applications - Energy measurement on board trains - Part 4: Communication |
CEI EN 61158-4-3 : 2016 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-3: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 3 ELEMENTS |
UNE-EN 15714-2:2010 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
I.S. EN 61784-3-8:2017 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-8: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 8 |
IEC 61784-3-17:2016 | Industrial communication networks - Profiles - Part 3-17: Functional safety fieldbuses - Additional specifications for CPF 17 |
DIN EN 61158-3-12:2015-07 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-12: DATA-LINK LAYER SERVICE DEFINITION - TYPE 12 ELEMENTS (IEC 61158-3-12:2014) |
DIN EN 15714-2:2010-02 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
DIN EN 61158-3-16:2008-09 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-16: DATA-LINK LAYER SERVICE DEFINITION - TYPE 16 ELEMENTS |
EN 61784-3-2:2017 | Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2 |
I.S. EN 61158-4:2004 | DIGITAL DATA COMMUNICATION FOR MEASUREMENT AND CONTROL - FIELDBUS FOR USE IN INDUSTRIAL CONTROL SYSTEMS - PART 4: DATA LINK PROTOCOL SPECIFICATION |
CEI EN 61326-2-5 : 2013 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 2-5: PARTICULAR REQUIREMENTS - TEST CONFIGURATIONS, OPERATIONAL CONDITIONS AND PERFORMANCE CRITERIA FOR DEVICES WITH FIELD BUS INTERFACES ACCORDING TO IEC 61784-1 |
S.R. CLC/TR 61491:2010 | ELECTRICAL EQUIPMENT OF INDUSTRIAL MACHINES - SERIAL DATA LINK FOR REAL-TIME COMMUNICATION BETWEEN CONTROLS AND DRIVES |
I.S. EN 61131-9:2013 | PROGRAMMABLE CONTROLLERS - PART 9: SINGLE-DROP DIGITAL COMMUNICATION INTERFACE FOR SMALL SENSORS AND ACTUATORS (SDCI) |
IEC 62888-4:2018 | Railway applications - Energy measurement on board trains - Part 4: Communication |
CEI EN 62453-306 : 2011 | FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION - PART 306: COMMUNICATION PROFILE INTEGRATION - IEC 61784 CPF 6 |
I.S. EN 61158-3-18:2008 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-18: DATA-LINK LAYER SERVICE DEFINITION - TYPE 18 ELEMENTS |
BS EN 61158-5-12:2014 | Industrial communication networks. Fieldbus specifications Application layer service definition. Type 12 elements |
BS EN 61784-2:2014 | Industrial communication networks. Profiles Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 |
I.S. EN 61158-4-18:2012 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 4-18: DATA-LINK LAYER PROTOCOL SPECIFICATION - TYPE 18 ELEMENTS (IEC 61158-4-18:2010 (EQV)) |
BS EN 61158-5-21:2012 | Industrial communication networks. Fieldbus specifications Application layer service definition. Type 21 elements |
BS EN 61158-4-3:2014 | Industrial communication networks. Fieldbus specifications Data-link layer protocol specification. Type 3 elements |
BS EN 61158-5-10:2014 | Industrial communication networks. Fieldbus specifications Application layer service definition. Type 10 elements |
BS EN 61158-3-21:2012 | Industrial communication networks. Fieldbus specifications Data-link layer service definition. Type 21 elements |
I.S. EN 61158-3-7:2008 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 3-7: DATA-LINK LAYER SERVICE DEFINITION - TYPE 7 ELEMENTS |
NF EN 61158-6-10 : 2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 6-10: APPLICATION LAYER PROTOCOL SPECIFICATION - TYPE 10 ELEMENTS |
I.S. EN 61375-3-1:2012 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-1: MULTIFUNCTION VEHICLE BUS (MVB) (IEC 61375-3-1:2012 (EQV)) |
I.S. EN 50463-4:2017 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 4: COMMUNICATION |
API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
I.S. EN 61800-2:2015 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 2: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED A.C. POWER DRIVE SYSTEMS |
I.S. EN 61800-7-303:2016 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-303: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - MAPPING OF PROFILE TYPE 3 TO NETWORK TECHNOLOGIES |
IEC TR 61491:2010 | Electrical equipment of industrial machines - Serial data link for real-time communication between controls and drives |
I.S. EN 62453-302:2017 | FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION - PART 302: COMMUNICATION PROFILE INTEGRATION - IEC 61784 CPF 2 |
IEC PAS 62953:2015 | Industrial communication networks - Fieldbus specifications - ADS-net |
EN 62453-301:2009/A1:2017 | FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION - PART 301: COMMUNICATION PROFILE INTEGRATION - IEC 61784 CPF 1 |
EN 50128:2011/AC:2014 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
CSA C22.2 No. 60079-11 : 2014 | EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I' |
EN 61918:2013/AC:2014 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED) |
IEC 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
IEC 61784-3-14:2010 | Industrial communication networks - Profiles - Part 3-14: Functional safety fieldbuses - Additional specifications for CPF 14 |
IEC 61158-3-12:2014 | Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 elements |
IEC 61158-5-12:2014 | Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements |
IEC 61158-6-10:2014 | Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements |
IEC 61158-4-7:2007 | Industrial communication networks - Fieldbus specifications - Part 4-7: Data-link layer protocol specification - Type 7 elements |
11/30258071 DC : 0 | BS EN 61918 - INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES |
IEC 61158-3-4:2014 | Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elements |
IEC 61784-3-1:2010 | Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1 |
IEC 61158-4-3:2014 | Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specificationn - Type 3 elements |
IEC 61158-4-8:2007 | Industrial communication networks - Fieldbus specifications - Part 4-8: Data-link layer protocol specification - Type 8 elements |
EN 62453-302:2017 | Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2 |
EN 61158-3-3:2014 | Industrial communication networks - Fieldbus specifications - Part 3-3: Data-link layer service definition - Type 3 elements |
EN 61158-6-10:2014 | Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements |
EN 61158-3-12:2014 | Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 elements |
EN 61158-5-21:2012 | Industrial communication networks - Fieldbus specifications - Part 5-21: Application layer service definition - Type 21 elements |
EN 61158-3-16:2008 | Industrial communication networks - Fieldbus specifications - Part 3-16: Data-link layer service definition - Type 16 elements |
EN 61800-7-303:2016 | Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies |
EN 61158-1:2014 | Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series |
EN 61158-3-1:2014 | Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elements |
EN 61158-3-21:2012 | Industrial communication networks - Fieldbus specifications - Part 3-21: Data-link layer service definition - Type 21 elements |
EN 61158-3-18:2008 | Industrial communication networks - Fieldbus specifications - Part 3-18: Data-link layer service definition - Type 18 elements |
EN 61158-4:2004 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data link protocol specification |
EN 13149-2:2004 | Public transport - Road vehicle scheduling and control systems - Part 2: WORLDFIP cabling specifications |
EN 61158-4-8:2008 | Industrial communication networks - Fieldbus specifications - Part 4-8: Data-link layer protocol specification - Type 8 elements |
EN 62453-306:2009 | Field device tool (FDT) interface specification - Part 306: Communication profile integration - IEC 61784 CPF 6 |
EN 60079-11:2012 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
EN 61800-7-202:2016 | Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification |
EN 61158-4-7:2008 | Industrial communication networks - Fieldbus specifications - Part 4-7: Data-link layer protocol specification - Type 7 elements |
EN 61158-3:2004 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 3: Data link service definition |
EN 61158-4-16:2008 | Industrial communication networks - Fieldbus specifications - Part 4-16: Data-link layer protocol specification - Type 16 elements |
EN 61158-3-2:2014 | Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements |
EN 61158-4-2:2014 | Industrial communication networks - Fieldbus specifications -Part 4-2: Data-link layer protocol specification - Type 2 elements |
EN 61375-3-1 : 2012 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-1: MULTIFUNCTION VEHICLE BUS (MVB) (IEC 61375-3-1:2012) |
EN 61131-9 : 2013 | Programmable controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) |
EN 61784-2:2014 | Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 |
IEC 60255-22-1:2007 | Measuring relays and protection equipment - Part 22-1: Electrical disturbance tests - 1 MHz burst immunity tests |
ISO 4892-1:2016 | Plastics Methods of exposure to laboratory light sources Part 1: General guidance |
IEC 60364-5-54:2011 | Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
IEC 61158-4-20:2014 | Industrial communication networks - Fieldbus specifications - Part 4-20: Data-link layer protocol specification - Type 20 elements |
IEC 61158-4-7:2007 | Industrial communication networks - Fieldbus specifications - Part 4-7: Data-link layer protocol specification - Type 7 elements |
IEC 61169-8:2007 | Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 Ω (type BNC) |
TIA/EIA 422 : B1994(R2014) | ELECTRICAL CHARACTERISTICS OF BALANCED VOLTAGE DIGITAL INTERFACE CIRCUITS |
IEC 61158-4-1:2014 | Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements |
IEC 60807-3:1990 | Rectangular connectors for frequencies below 3 MHz - Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/rear extraction |
IEC 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
ISO/IEC 7498-1:1994 | Information technology Open Systems Interconnection Basic Reference Model: The Basic Model |
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
IEC 60189-1:2007 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods |
IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
IEC 61754-22:2005 | Fibre optic connector interfaces - Part 22: Type F-SMA connector family |
ISO/IEC 8886:1996 | Information technology Open Systems Interconnection Data link service definition |
IEC 60793-2-30:2015 | Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres |
IEC 61210:2010 | Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements |
IEC 61596:1995 | Magnetic oxide EP-cores and associated parts for use in inductors and transformers - Dimensions |
IEC 60794-1-2:2017 | Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance |
IEC 60793-2-40:2015 | Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres |
IEC 61158-4-12:2014 | Industrial communication networks - Fieldbus specifications - Part 4-12: Data-link layer protocol specification - Type 12 elements |
ISO/IEC 8802-3:2000 | Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications |
IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
ISO/IEC 10731:1994 | Information technology Open Systems Interconnection Basic Reference Model Conventions for the definition of OSI services |
IEC 61754-2:1996 | Fibre optic connector interfaces - Part 2: Type BFOC/2,5 connector family |
IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
IEC 61754-13:2006 | Fibre optic connector interfaces - Part 13: Type FC-PC connector |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
IEC 60754-2:2011 | Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity |
IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
IEC 60079-25:2010 | Explosive atmospheres - Part 25: Intrinsically safe electrical systems |
IEC 61300-3-4:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation |
IEC 61156-1:2007+AMD1:2009 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification |
ISO/IEC 10022:1996 | Information technology Open Systems Interconnection Physical Service Definition |
IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
IEC 61158-4-3:2014 | Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specificationn - Type 3 elements |
TIA/EIA 644 : A2001(R2012) | ELECTRICAL CHARACTERISTICS OF LOW VOLTAGE DIFFERENTIAL SIGNALING (LVDS) INTERFACE CIRCUITS |
IEC TR 61491:2010 | Electrical equipment of industrial machines - Serial data link for real-time communication between controls and drives |
IEC 60811-404:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths |
IEC 61158-4-18:2010 | Industrial communication networks - Fieldbus specifications - Part 4-18: Data-link layer protocol specification - Type 18 elements |
IEC 61131-2:2017 | Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests |
IEC 60947-5-2:2007+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 5-2: Control circuitdevices and switching elements - Proximity switches |
TIA 485 : A1998(R2012) | ELECTRICAL CHARACTERISTICS OF GENERATORS AND RECEIVERS FOR USE IN BALANCED DIGITAL MULTIPOINT SYSTEMS |
ISO/IEC 8482:1993 | Information technology Telecommunications and information exchange between systems Twisted pair multipoint interconnections |
IEC 61158-4-8:2007 | Industrial communication networks - Fieldbus specifications - Part 4-8: Data-link layer protocol specification - Type 8 elements |
IEC 60875-1:2015 | Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification |
IEC 60227-5:2011 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords) |
IEC 61158-3-20:2014 | Industrial communication networks - Fieldbus specifications - Part 3-20: Data-link layer service definition - Type 20 elements |
IEC 61784-2:2014 | Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 |
IEC 61158-4-16:2007 | Industrial communication networks - Fieldbus specifications - Part 4-16: Data-link layer protocol specification - Type 16 elements |
IEC 60811-403:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds |
IEC 60603-7-4:2010 | Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.