I.S. EN 14986:2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
Hardcopy , PDF
05-02-2024
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for all fans
5 Additional requirements for category 2
6 Category 1 fans for specific use with a gaseous explosive
atmosphere as a conveyed atmosphere (flammable or not)
7 Information for use
Annex A (normative) - Additional requirements for category 1
G fans
Annex B (informative) - Classification of requirements for the
different categories
Annex C (informative) - Checklist for verification of the safety
requirements and/or protective measures
Annex D (informative) - Examples of types of fans showing ignition
minimizing features
Annex E (normative) - List of significant hazards
Annex ZA (informative) - Relationship between this European Standard
and the Essential Requirements of EU Directive 2014/34/EU
Bibliography
Describes the constructional requirements for fans constructed to Group II G (of explosion groups IIA, IIB and hydrogen) categories 1, 2 and 3, and Group II D categories 2 and 3, intended for use in explosive atmospheres.
DocumentType |
Standard
|
Pages |
58
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NEN EN 14986 : 2017 | Identical |
NBN EN 14986 : 2007 | Identical |
NF EN 14986 : 2017 | Identical |
EN 14986:2017 | Identical |
SN EN 14986 : 2017 | Identical |
UNI EN 14986 : 2007 | Identical |
UNE-EN 14986:2017 | Identical |
DIN EN 14986:2014-04 (Draft) | Identical |
NS EN 14986 : 2017 | Identical |
BS EN 14986:2007 | Identical |
DIN EN 14986:2007-05 | Identical |
DIN EN 14986 E : 2007 | Identical |
EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
ISO 5802:2001 | Industrial fans — Performance testing in situ |
EN 60079-1:2014 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
EN 1710:2005+A1:2008/AC:2010 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
ISO 14694:2003 | Industrial fans Specifications for balance quality and vibration levels |
ISO 9563:2015 | Belt drives Electrical conductivity of antistatic endless synchronous belts Characteristics and test method |
EN 60034-1:2010/corrigendum Oct. 2010 | ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE |
EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
EN ISO 80079-36:2016 | Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016) |
EN 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
ISO 1940:1973 | Balance quality of rotating rigid bodies |
EN 60335-2-80:2003/A2:2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS |
ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
CLC/TR 60079-32-1:2015 | Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance |
EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
EN 13237:2012 | Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
EN ISO 5802:2008/A1:2015 | INDUSTRIAL FANS - PERFORMANCE TESTING IN SITU (ISO 5802:2001/AMD 1:2015) |
EN 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
ISO 13351:2009 | Fans — Dimensions |
EN ISO 13349:2010 | Fans - Vocabulary and definitions of categories (ISO 13349:2010) |
ISO 80079-36:2016 | Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements |
ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
ISO 281:2007 | Rolling bearings Dynamic load ratings and rating life |
EN ISO 13351:2009 | Fans - Dimensions (ISO 13351:2009) |
EN ISO 5801:2017 | Fans - Performance testing using standardized airways (ISO 5801:2017) |
IEC 60167:1964 | Methods of test for the determination of the insulation resistance of solid insulating materials |
ISO 5801:2017 | Fans — Performance testing using standardized airways |
EN 60079-11:2012 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
ISO 14695:2003 | Industrial fans Method of measurement of fan vibration |
EN 1755:2015 | Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres |
ISO 1813:2014 | Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test |
ISO 1925:2001 | Mechanical vibration Balancing Vocabulary |
ISO 80079-37:2016 | Explosive atmospheres Part 37: Non-electrical equipment for explosive atmospheres Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' |
EN 13463-2:2004 | Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure 'fr' |
ISO 16852:2016 | Flame arresters — Performance requirements, test methods and limits for use |
ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
EN 60079-5:2015 | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
EN 13463-3:2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd' |
ISO 2409:2013 | Paints and varnishes Cross-cut test |
TRAC 201 : 1990 | |
EN ISO 11925-2:2010/AC:2011 | REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
EN 1652:1997/AC:2003 | COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES |
EN ISO 80079-37:2016 | Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016) |
EN ISO 16852:2016 | Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016) |
ISO 13349:2010 | Fans — Vocabulary and definitions of categories |
EN 60079-2:2014/AC:2015 | EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.