DIN CEN/TS 16811-3;DIN SPEC 30757:2016-08
Current
The latest, up-to-date edition.
WINTER SERVICE EQUIPMENT AND PRODUCTS - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
German
01-01-2016
This standard is included in DIN Handbook 172-3.
DevelopmentNote |
Also numbered as DIN SPEC 30757. (08/2016)
|
DocumentType |
Standard
|
Pages |
44
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Standards | Relationship |
CEN/TS 16811-3:2015 | Identical |
CEN/TS 15597-2:2012 | Winter maintenance equipment - Spreading machines (gritting machines) - Part 2: Requirements for distribution and its test |
ISO 11130:2010 | Corrosion of metals and alloys Alternate immersion test in salt solution |
ISO 9377-2:2000 | Water quality Determination of hydrocarbon oil index Part 2: Method using solvent extraction and gas chromatography |
EN ISO 11885:2009 | Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007) |
EN 573-5:2007 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products |
EN 27888 : 1993 | WATER QUALITY - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
EN 573-2:1994 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system |
EN ISO 3104:1996 | Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
ISO 5815-1:2003 | Water quality Determination of biochemical oxygen demand after n days (BODn) Part 1: Dilution and seeding method with allylthiourea addition |
EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
PREN 16811-1 : DRAFT 2014 | WINTER SERVICE EQUIPMENT - DE-ICING AGENTS - PART 1: SODIUM CHLORIDE - REQUIREMENTS AND TEST METHODS |
EN 13036-1:2010 | Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique |
ISO 565:1990 | Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
EN 1484 : 1997 | WATER ANALYSIS - GUIDELINES FOR THE DETERMINATION OF TOTAL ORGANIC CARBON (TOC) AND DISSOLVED ORGANIC CARBON (DOC) |
ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
ISO 2591-1:1988 | Test sieving — Part 1: Methods using test sieves of woven wire cloth and perforated metal plate |
ISO 12846:2012 | Water quality — Determination of mercury — Method using atomic absorption spectrometry (AAS) with and without enrichment |
ISO 6060:1989 | Water quality — Determination of the chemical oxygen demand |
ISO 11885:2007 | Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
ISO 8397:1988 | Solid fertilizers and soil conditioners — Test sieving |
PREN 16811-2 : DRAFT 2014 | WINTER MAINTENANCE EQUIPMENT - DE-ICING AGENTS - PART 2: CALCIUM CHLORIDE AND MAGNESIUM CHLORIDE - REQUIREMENTS AND TEST METHODS |
ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
ISO 758:1976 | Liquid chemical products for industrial use — Determination of density at 20 degrees C |
ISO 15705:2002 | Water quality Determination of the chemical oxygen demand index (ST-COD) Small-scale sealed-tube method |
EN 14231:2003 | Natural stone test methods - Determination of the slip resistance by means of the pendulum tester |
EN 10025-5:2004 | Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
EN 15597-1:2009 | Winter maintenance equipment — Spreading machines (gritting machines) — Part 1: General requirements and definitions for spreading machines |
EN 10025-2:2004/AC:2005 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
EN 15144:2007 | Winter maintenance equipment - Terminology - Terms for winter maintenance |
EN 1236 : 1995 | FERTILIZERS - DETERMINATION OF BULK DENSITY (LOOSE) |
EN 15749:2009 | Fertilizers - Determination of sulfates content using three different methods |
ISO 649-2:1981 | Laboratory glassware — Density hydrometers for general purposes — Part 2: Test methods and use |
EN 1235:1995/A1:2003 | SOLID FERTILIZERS - TEST SIEVING |
EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
EN 573-1:2004 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system |
ISO 2479:1972 | Sodium chloride for industrial use — Determination of matter insoluble in water or in acid and preparation of principal solutions for other determinations |
EN ISO 9377-2 : 2000 | WATER QUALITY - DETERMINATION OF HYDROCARBON OIL INDEX - PART 2: METHOD USING SOLVENT EXTRACTION AND GAS CHROMATOGRAPHY (ISO 9377-2:2000) |
EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
ISO 2480:1972 | Sodium chloride for industrial use — Determination of sulphate content — Barium sulphate gravimetric method |
ISO 3944:1992 | Fertilizers — Determination of bulk density (loose) |
EN ISO 1523:2002 | Determination of flash point - Closed cup equilibrium method (ISO 1523:2002) |
EN 932-1:1996 | Tests for general properties of aggregates - Part 1: Methods for sampling |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.