CSA Z1006 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
MANAGEMENT OF WORK IN CONFINED SPACES
Hardcopy , PDF
12-09-2020
English, French
01-01-2016
Preface
0 Introduction
1 Scope
2 Reference publications
3 Definitions and abbreviations
4 Confined space management program
5 Roles and responsibilities
6 Program development requirements
7 Training
8 Implementation of the confined space management program
9 Investigation and corrective action
10 Management review
Annex A (informative) - Guidance on the use of this Standard
Annex B (informative) - Sample forms
Annex C (informative) - Confined space atmospheric testing
and monitoring
Annex D (informative) - Rescue planning
Annex E (informative) - Confined space ventilation
Annex F (informative) - Bibliography
Defines requirements for: a) establishing and maintaining a confined space management program in accordance with OHSMS principles; b) the roles and responsibilities of management, the entry team, and the emergency response team; c) identification and designation of confined spaces; d) design and engineering of confined spaces; e) hazard identification and risk assessment relating to work in confined spaces; f) management and control of hazards and risks associated with work in confined spaces; g) personal protective equipment (PPE) and other equipment used for work in confined spaces; h) general safety procedures for confined spaces; i) training for work in confined spaces; j) determining worker capability of performing assigned duties within confined spaces; k) emergency plans for rescuing workers in confined spaces; l) management of external service providers; and m) documentation.
DocumentType |
Standard
|
Pages |
108
|
PublisherName |
Canadian Standards Association
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
CSA Z1002 : 2012 : INC : UPD 2 : 2014 | OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL |
CSA Q31001:2011 | IMPLEMENTATION GUIDE TO CAN/CSA-ISO 31000, RISK MANAGEMENT - PRINCIPLES AND GUIDELINES |
CSA Q31001 : 2011 : R2015 | IMPLEMENTATION GUIDE TO CAN/CSA-ISO 31000, RISK MANAGEMENT - PRINCIPLES AND GUIDELINES |
CAN/CSA-Z1002-12 (R2017) | Occupational health and safety - Hazard identification and elimination and risk assessment and control |
CSA Z463 : 2013 | GUIDELINE ON MAINTENANCE OF ELECTRICAL SYSTEMS |
CSA Z94.4 : 2011 | SELECTION, USE, AND CARE OF RESPIRATORS |
Z276-18 | Liquefied natural gas (LNG) - Production, storage, and handling |
CSA Z94.4 : 2011(R2016) | SELECTION, USE, AND CARE OF RESPIRATORS |
CSA Z94.4 : 2011 : INC : UPD 1 : 2012 | SELECTION, USE, AND CARE OF RESPIRATORS |
CSA Z94.4 : 2011 : INC : UPD 2 : 2016 : R201600 | SELECTION, USE, AND CARE OF RESPIRATORS |
CAN//CSA-Z1001-18 | OCCUPATIONAL HEALTH AND SAFETY TRAINING |
S6-14 | Canadian Highway Bridge Design Code |
Z412-17 | Office ergonomics — An application standard for workplace ergonomics |
Z462-18 | Workplace electrical safety |
CSA Z1000 : 2014 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT |
CSA Z275.2 : 2015 | OCCUPATIONAL SAFETY CODE FOR DIVING OPERATIONS |
CSA Z1002 : 2012 : INC : UPD 1 : 2013 | OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL |
PLUS 61400 (1st ed. pub. 2012) | CSA guide to Canadian wind turbine codes and standards |
NFPA 350 : 2016 | SAFE CONFINED SPACE ENTRY AND WORK |
CSA W117.2 : 2012 : INC : UPD 2 : 2014 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
CSA W117.2 : 2012 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
CSA W117.2 : 2012 : INC : UPD 1 : 2013 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
CAN/CSA-W117.2-12 (R2017) | Safety in welding, cutting, and allied processes |
CSA CE CODE SAFETY PACKAGE : 2012 | CE CODE SAFETY PACKAGE |
CSA Z94.4 : 2011 : INC : UPD 1 : 2012 : FR | SELECTION, USE, AND CARE OF RESPIRATORS |
CSA Z94.4 : 2011 : R2016 | SELECTION, USE, AND CARE OF RESPIRATORS |
ANSI/CSA-B149.6-15 | Code for digester gas, landfill gas, and biogas generation and utilization |
Z1010-18 | Management of work in extreme conditions |
CSA Z460 : 2013 | CONTROL OF HAZARDOUS ENERGY - LOCKOUT AND OTHER METHODS |
CSA Z1002 : 2012 | OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL |
NFPA 91 : 2015 | EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS |
Z195.1-16 | Guideline on selection, care, and use of protective footwear |
CSA Z259.2.2 : 2014 | SELF-RETRACTING DEVICES |
CSA Z94.3 : 2015 | EYE AND FACE PROTECTORS |
NFPA 1006 : 2017 | TECHNICAL RESCUE PERSONNEL PROFESSIONAL QUALIFICATIONS |
C22.1-15 | Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations |
AIHA Z10 : 2012 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS |
CSA Z1001 : 2013 | OCCUPATIONAL HEALTH AND SAFETY TRAINING |
Z259.11-17 | Personal energy absorbers and lanyards |
CSA Z1600 : 2014 | EMERGENCY AND CONTINUITY MANAGEMENT PROGRAM |
CSA Z462 : 2015 | WORKPLACE ELECTRICAL SAFETY |
CSA Z94.2 : 2014 | HEARING PROTECTION DEVICES - PERFORMANCE, SELECTION, CARE, AND USE |
CSA Z275.2 : 2015 | OCCUPATIONAL SAFETY CODE FOR DIVING OPERATIONS |
ASME B31.3:2016 | PROCESS PIPING |
OHSAS 18001:2007 | Occupational health and safety management systems. Requirements |
CSA Z259.17 : 2016 | SELECTION AND USE OF ACTIVE FALL-PROTECTION EQUIPMENT AND SYSTEMS |
CSA Z259.2.4 : 2015 | FALL ARRESTERS AND VERTICAL RIGID RAILS |
Z94.3.1-16 | Guideline for selection, use, and care of eye and face protectors |
CSA Z96 : 2015 | HIGH-VISIBILITY SAFETY APPAREL |
CSA Z259.2.3 : 2016 | DESCENT DEVICES |
Z259.15-17 | Anchorage connectors |
CSA Z460 : 2013 | CONTROL OF HAZARDOUS ENERGY - LOCKOUT AND OTHER METHODS |
CSA Z180.1 : 2013 | COMPRESSED BREATHING AIR AND SYSTEMS |
ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
CSA Z195:14 (R2019) | Protective footwear |
CSA Z259.16 : 2015 | DESIGN OF ACTIVE FALL-PROTECTION SYSTEMS |
ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
CSA Z1000 : 2014 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT |
CSA Z94.1 : 2015 | INDUSTRIAL PROTECTIVE HEADWEAR - PERFORMANCE, SELECTION, CARE, AND USE |
NFPA 1670 : 2017 | OPERATIONS AND TRAINING FOR TECHNICAL SEARCH AND RESCUE INCIDENTS |
AIHA Z9.2 : 2012 | FUNDAMENTALS GOVERNING THE DESIGN AND OPERATION OF LOCAL EXHAUST VENTILATION SYSTEMS |
Z259.2.5-17 | Fall arresters and vertical lifelines |
NFPA 350 : 2016 | SAFE CONFINED SPACE ENTRY AND WORK |
CSA Z259.13 : 2016 | MANUFACTURED HORIZONTAL LIFELINE SYSTEMS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.