ASCE/EWRI 12-13, 13-13, 14-13 : 2013
Current
The latest, up-to-date edition.
STANDARD GUIDELINES FOR THE DESIGN, INSTALLATION, AND OPERATION AND MAINTENANCE OF URBAN SUBSURFACE DRAINAGE
Hardcopy , PDF
English
01-01-2013
Standard Guidelines for the Design of Urban Subsurface
Drainage, ANSI/ASCE/EWRI 12-13
FOREWORD
ACKNOWLEDGMENTS
1 Scope
2 Definitions
3 Site Analysis
4 System Configuration
5 Drain Envelopes
6 Hydraulics and Hydrology
7 Structural Considerations
8 Materials
9 Codes and Permits
10 References
Standard Guidelines for the Installation of Urban
Subsurface Drainage, ANSI/ASCE/EWRI 13-13
FOREWORD
ACKNOWLEDGMENTS
1 Scope
2 Definitions
3 Contract Documents
4 Site Investigation
5 Installation
6 Inspection
7 References
Appendix A - Recommended Use of Trench Boxes
Standard Guidelines for the Operation and Maintenance of
Urban Subsurface Drainage, ANSI/ASCE/EWRI 14-13
FOREWORD
ACKNOWLEDGMENTS
1 Scope
2 Definitions
3 Operation and Maintenance Plan
4 Water Quality
5 Periodic Inspection
6 Maintenance
7 References
Index
Prepared by the Urban Drainage Standards Committee of the Standards Development Council of the Environmental and Water Resources Institute of ASCE.
DevelopmentNote |
This is a single-volume set of three Standards - ASCE/EWRI 12-13, ASCE/EWRI 13-13 and ASCE/EWRI 14-13. 2005 Edition is also available; See: ASCE 12 05, ASCE 13 05 and ASCE 14 05. (11/2013)
|
DocumentType |
Standard
|
ISBN |
9780784477939
|
Pages |
108
|
PublisherName |
American Society of Civil Engineers
|
Status |
Current
|
Supersedes |
AASHTO M 242M/M 242 : 2015 | SPECIFICATION FOR REINFORCED CONCRETE D-LOAD CULVERT, STORM DRAIN, AND SEWER PIPE |
AWWA C905 : 2010 | POLYVINYL CHLORIDE (PVC) PRESSURE PIPE AND FABRICATED FITTINGS, 14 IN. THROUGH 48 IN. (350 MM THROUGH 1,200 MM), FOR WATER TRANSMISSION AND DISTRIBUTION |
ASCE 15 98 : 2000 | STANDARD PRACTICE FOR DIRECT DESIGN OF BURIED PRECAST CONCRETE PIPE USING STANDARD INSTALLATIONS (SIDD) |
ASTM D 7498/D7498M : 2009 : R2014 : EDT 1 | Standard Test Method for Vertical Strip Drains Using a Large Scale Consolidation Test |
ASTM D 3034 : 2016 : REDLINE | Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings |
ASTM D 4751 : 2016 : REDLINE | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
ASTM A 760/A760M : 2015 : REDLINE | Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains |
AASHTO M 274 : 1987 | SPECIFICATION FOR STEEL SHEET, ALUMINUM-COATED (TYPE 2), FOR CORRUGATED STEEL PIPE |
ASTM B 745/B745M : 2015 : REDLINE | Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains |
ASCE 45 05 : 2006 | Standard Guidelines for the Design (45-05), Installation (46-05), and Operation and Maintenance (47-05) of Urban Stormwater Systems |
CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
AASHTO M 294 : 2015 | SPECIFICATION FOR CORRUGATED POLYETHYLENE PIPE, 300- TO 1500-MM (12- TO 60-IN.) DIAMETER |
ASTM C 444M : 2017 : REDLINE | Standard Specification for Perforated Concrete Pipe (Metric) |
ASTM C 4 : 2004 | Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile |
ASTM F 679 : 2016 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings |
ASCE 28 00 : 2001 | STANDARD PRACTICE FOR DIRECT DESIGN OF PRECAST CONCRETE BOX SECTIONS FOR JACKING IN TRENCHLESS CONSTRUCTION |
AASHTO M 170M : 2015 | SPECIFICATION FOR REINFORCED CONCRETE CULVERT, STORM DRAIN, AND SEWER PIPE [METRIC] |
ASTM C 412M : 2015 : REDLINE | SPECIFICATION FOR CONCRETE DRAIN TILE [METRIC] |
ANSI/AWWA C300 : 2016 | REINFORCED CONCRETE PRESSURE PIPE, STEEL - CYLINDER TYPE |
ASTM C 654M : 2015 : REDLINE | SPECIFICATION FOR POROUS CONCRETE PIPE [METRIC] |
ASTM D 7273/D7273M : 2008 : R2013 : EDT 1 | Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites |
AASHTO M 207M/M 207 : 2015 | SPECIFICATION FOR REINFORCED CONCRETE ELLIPTICAL CULVERT, STORM DRAIN, AND SEWER PIPE |
AASHTO M 252 : 2009 | SPECIFICATION FOR CORRUGATED POLYETHYLENE DRAINAGE PIPE |
ASTM A 849 : 2015 : REDLINE | Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe |
AWWA C302 : 2016 | REINFORCED CONCRETE PRESSURE PIPE, NONCYLINDER TYPE |
ASCE/EWRI 33 09 : 2009 | COMPREHENSIVE TRANSBOUNDARY WATER QUALITY MANAGEMENT AGREEMENT WITH GUIDELINES FOR DEVELOPMENT OF A MANAGEMENT PLAN, STANDARDS, AND CRITERIA |
ASTM D 6917 : 2016 : REDLINE | Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD) |
ASTM C 136 : 2006 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
AASHTO M 206M/M 206 : 2015 | SPECIFICATION FOR REINFORCED CONCRETE ARCH CULVERT, STORM DRAIN, AND SEWER PIPE |
ASTM D 2241 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) |
ASTM A 761/A761M : 2017-02 | SPECIFICATION FOR CORRUGATED STEEL STRUCTURAL PLATE, ZINC-COATED, FOR FIELD-BOLTED PIPE, PIPE-ARCHES, AND ARCHES |
ASTM C 505M : 2015 : REDLINE | SPECIFICATION FOR NONREINFORCED CONCRETE IRRIGATION PIPE WITH RUBBER GASKET JOINTS [METRIC] |
ASTM C 118M : 2015 : REDLINE | SPECIFICATION FOR CONCRETE PIPE FOR IRRIGATION OR DRAINAGE [METRIC] |
ASTM D 2751 : 2005 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Withdrawn 2014) |
AWWA C301 : 2014 | PRESTRESSED CONCRETE PRESSURE PIPE, STEEL-CYLINDER TYPE |
AASHTO M 167M/M 167 : 2014 | SPECIFICATION FOR CORRUGATED STEEL STRUCTURAL PLATE, ZINC-COATED, FOR FIELD-BOLTED PIPE, PIPE-ARCHES, AND ARCHES |
ASTM A 762/A762M : 2015 : REDLINE | Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains |
ASTM F 2562/F2562M : 2015 : REDLINE | Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage |
AASHTO M 196 : 1992 | SPECIFICATION FOR CORRUGATED ALUMINUM PIPE FOR SEWERS AND DRAINS |
CFR 29(PT1926) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION |
ASTM D 1621 : 2016 : REDLINE | Standard Test Method for Compressive Properties of Rigid Cellular Plastics |
AASHTO M 245 : 2000 | SPECIFICATION FOR CORRUGATED STEEL PIPE, POLYMER-PRECOATED, FOR SEWERS AND DRAINS |
AWWA C303 : 2017 | CONCRETE PRESSURE PIPE, BAR-WRAPPED, STEEL-CYLINDER TYPE |
ASCE 26 97 : 2000 | STANDARD PRACTICE FOR DIRECT DESIGN OF BURIED PRECAST CONCRETE BOX SECTIONS |
AASHTO M 145 : 1991 | SPECIFICATION FOR CLASSIFICATION OF SOILS AND SOIL-AGGREGATE MIXTURES FOR HIGHWAY CONSTRUCTION PURPOSES |
ASTM D 3035 : 2015 : REDLINE | Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter |
AASHTO M 190 : 2000 | SPECIFICATION FOR ASPHALT-COATED CORRUGATED METAL CULVERT PIPE AND PIPE-ARCHES |
ASTM C 361M : 2016 : REDLINE | SPECIFICATION FOR REINFORCED CONCRETE LOW-HEAD PRESSURE PIPE [METRIC] |
AWWA C900 : 2016 | POLYVINYL CHLORIDE (PVC) PRESSURE PIPE AND FABRICATED FITTINGS, 4 IN. THROUGH 60 IN. (100 MM THROUGH 1,500 MM) |
ASTM D 4595 : 2017 : REDLINE | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
ASTM F 949 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings |
ASTM D 4716/D4716M : 2014 : REDLINE | Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM F 758 : 2014 : REDLINE | Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage |
ASCE 27 00:2000 | STANDARD PRACTICE OF DIRECT DESIGN OF PRECAST CONCRETE PIPE FOR JACKING IN TRENCHLESS CONSTRUCTION |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.