Preview

Pavements Residential

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

12-13-2016

Publisher

Standards Australia

Preview

Committee	BD-098
DocumentType	Standard
ISBN	978-1-76035-610-1
Pages	34
PublisherName	Standards Australia
Status	Current
Supersedes	DR2 AS 3727.1:2016 CP AS 3727-1993

This Standard specifies the design and construction of pavements for light usage, low speed, non-commercial applications for vehicles with a gross vehicle mass not exceeding 10 t. This includes patios, paths, driveways, vehicle crossovers and recreational pavements such as cycleways.This Standard excludes the following:(a) Concrete pavements using fibres as the sole means of reinforcement.(b) Roads and industrial pavements.(c) Class H1, H2, E and P sites (see Table 1.5).

Originated as AS 3727—1993.Revised and redesignated as AS 3727.1:2016. Originated as AS3727-1993. Revised and redesignated as AS3727.1:2016.

AS 1289.4.4.1-1997	Methods of testing soils for engineering purposes Soil chemical tests - Determination of the electrical resistivity of a soil - Method for sands and granular materials
AS 1289.6.3.3-1997	Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Perth sand penetrometer test (Reconfirmed 2013)
AS/NZS 4456.10:2003	Masonry units, segmental pavers and flags - Methods of test Determining resistance to salt attack (Reconfirmed 2023)
AS 1289.6.1.3-1998	Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard field-in-place method
AS/NZS 4456.0:2003	Masonry units, segmental pavers and flags - Methods of test General introduction and list of methods (Reconfirmed 2023)
AS 1428-1977	Code of practice of design rules for access by the disabled
AS/NZS 4456.9:2003	Masonry units and segmental pavers and flags - Methods of test Determining abrasion resistance
AS 1289.2.2.1-1998	Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the total suction of a soil - Standard method (Reconfirmed 2013)
AS 1289.6.3.1-2004	Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Standard penetration test (SPT) (Reconfirmed 2016)
AS 1289.3.5.1-2006	Methods of testing soils for engineering purposes Soil classification tests - Determination of the soil particle density of a soil - Standard method
AS 1289.5.8.5-1998	Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Density of a Type A or Type C standard density block (Reconfirmed 2013)
AS 1289.6.5.1-1999	Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the static cone penetration resistance of a soil - Field test using a mechanical and electrical cone or friction-cone penetrometer (Reconfirmed 2013)
AS 1289.3.5.2-2002	Methods of testing soils for engineering purposes Soil classification tests - Determination of the soil particle density of combined soil fractions - Vacuum pycnometer method (Reconfirmed 2013)
AS/NZS 4456.14:2003	Masonry units, segmental pavers and flags - Methods of test Determining water absorption properties (Reconfirmed 2023)
AS 1289.2.1.4-2005	Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Microwave-oven drying method (subsidiary method)
AS 1289.5.7.1-2006	Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Hilf density ratio and Hilf moisture variation (rapid method)
AS/NZS 3661.2:1994	Slip resistance of pedestrian surfaces Guide to the reduction of slip hazards
AS 1289.3.9.2-2006	Methods of testing soils for engineering purposes Soil classification tests - Determination of the cone liquid limit of soil - One-point method
AS 1289.2.1.2-2005	Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Sand bath method (subsidiary method)
AS 1289.4.1.1-1997	Methods of testing soils for engineering purposes Soil chemical tests - Determination of the organic matter content of a soil - Normal method
AS/NZS 4456.6:2003	Masonry units, segmental pavers and flags - Methods of test Determining potential to effloresce (Reconfirmed 2023)
AS 1289.2.1.1-2005	Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Oven drying method (standard method)
AS 1289.3.3.1-2009	Methods of testing soils for engineering purposes Soil classification tests - Calculation of the plasticity index of a soil (Reconfirmed 2022)
AS 2870-2011	Residential slabs and footings
AS 1289.2.1.5-2005	Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Infrared lights method (subsidiary method)
AS 1289.7.1.2-1998	Methods of testing soils for engineering purposes Soil reactivity tests - Determination of the shrinkage index of a soil - Loaded shrinkage index
AS 1289.7.1.1-2003	Methods of testing soils for engineering purposes Soil reactivity tests - Determination of the shrinkage index of a soil - Shrink-swell index
AS 1289.5.8.8-1998	Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using proportion of water (Reconfirmed 2013)
AS 1289.0:2014	Methods of testing soils for engineering purposes Definitions and general requirements
AS 1289.5.4.2-2007	Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Assignment of maximum dry density and optimum moisture content values
AS 1289.6.7.3:2016	Methods of testing soils for engineering purposes Soil strength and consolidation tests-Determination of permeability of a soil-Constant head method using a flexible wall permeameter
AS 1289.6.6.1-1998	Methods of testing soils for engineering purposes - Soil strength and consolidation tests Determination of the one-dimensional consolidation properties of a soil - Standard method
AS/NZS 4456.3:2003	Masonry units, segmental pavers and flags - Methods of test Determining dimensions
AS 1289.3.7.1-2002	Methods of testing soils for engineering purposes Soil classification tests - Determination of the sand equivalent of a soil using a power-operated shaker
AS 1289.6.2.2-1998	Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of shear strength of a soil - Direct shear test using a shear box
AS/NZS 4456.18:2003	Masonry units, segmental pavers and flags - Methods of test Determining tensile strength of masonry units and segmental pavers (Reconfirmed 2023)
AS/NZS 4456.19:2003	Masonry units, segmental pavers and flags - Methods of test Determination of bow
AS/NZS 4456.8:2003	Masonry units, segmental pavers and flags - Methods of test Determining moisture content, dry density and ambient density (Reconfirmed 2023)
AS 1289.6.4.2:2016	Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a saturated specimen tested in undrained triaxial compression with measurement of pore water pressure
AS 1289.6.4.1:2016	Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a specimen tested in undrained triaxial compression without measurement of pore water pressure
AS 1289.3.8.3:2014	Methods of testing soils for engineering purposes Soil classification tests - Dispersion - Determination of pinhole dispersion classification of a soil
AS 1289.5.2.1-2003	Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density or moisture content relation of a soil using modified compactive effort
AS/NZS 4456.15:2003	Masonry units, segmental pavers and flags - Methods of test Determining lateral modulus of rupture (Reconfirmed 2023)
AS 1289.4.2.1-1997	Methods of testing soils for engineering purposes Soil chemical tests - Determination of the sulfate content of a natural soil and the sulfate content of the groundwater - Normal method
AS 1289.3.6.1-2009	Methods of testing soils for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving (Reconfirmed 2022)
AS 1289.5.8.9-1998	Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using comparison against primary blocks (Reconfirmed 2013) (Reconfirmed 2014)
AS 1289.5.8.4-2009	Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Calibration using standard blocks
AS 1289.3.2.1-2009	Methods of testing soils for engineering purposes Soil classification tests - Determination of the plastic limit of a soil - Standard method (Reconfirmed 2022)
AS/NZS 4456.17:2003	Masonry units, segmental pavers and flags - Methods of test Determining initial rate of absorption (suction) (Reconfirmed 2023)
AS 1289.5.1.1-2003	Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compactive effort
AS/NZS 4671:2001	Steel reinforcing materials
AS 1289.6.3.2-1997	Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the penetration resistance of a soil - 9 kg dynamic cone penetrometer test
AS/NZS 4456.7:2003	Masonry units, segmental pavers and flags - Methods of test Determining core percentage and material thickness (Reconfirmed 2023)
AS 1289.3.3.2-2009	Methods of testing soils for engineering purposes Soil classification tests - Calculation of the cone plasticity index of a soil (Reconfirmed 2022)
AS 1289.3.1.2-2009	Methods of testing soils for engineering purposes Soil classification tests - Determination of the liquid limit of a soil - One point Casagrande method (subsidiary method) (Reconfirmed 2017)
AS 3798-2007	Guidelines on earthworks for commercial and residential developments
AS/NZS 4455.2:2010	Masonry units, pavers, flags and segmental retaining wall units Pavers and flags (Reconfirmed 2020)
AS 2008-2013	Bitumen for pavements
AS 1289.6.9.1-2000	Methods of testing soils for engineering purposes Soil strength and consolidation test - Determination of stiffness of soil - Clegg impact value (CIV)
AS 1289.1.1-2001	Methods of testing soils for engineering purposes Sampling and preparation of soils - Preparation of disturbed soil samples for testing
AS 1289.6.1.2-1998	Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for an undisturbed specimen
AS 1289.5.5.1-1998	Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the minimum and maximum dry density of a cohesionless material - Standard method (Reconfirmed 2016)
AS 1289.3.9.1:2015	Methods of testing soils for engineering purposes Soil classification tests - Determination of the cone liquid limit of a soil
AS 1289.1.2.1-1998	Methods of testing soils for engineering purposes Sampling and preparation of soils - Disturbed samples - Standard method
AS/NZS 4586:2004	Slip resistance classification of new pedestrian surface materials
AS/NZS 4456.11:2003	Masonry units, segmental pavers and flags - Methods of test Determining coefficients of expansion (Reconfirmed 2023)
AS 1289.1.4.2-1998	Methods of testing soils for engineering purposes Sampling and preparation of soils - Selection of sampling or test sites - Stratified random number method
AS/NZS 2425:2015	Bar chairs in reinforced concrete - Product requirements and test methods
AS 1289.2.1.6-2005	Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Hotplate drying method
AS 1289.5.8.1-2007	Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture-Density gauge - Direct transmission mode
AS 1289.5.3.5-1997	Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method (Reconfirmed 2013)
AS 1289.4.3.1-1997	Methods of testing soils for engineering purposes Soil chemical tests - Determination of the pH value of a soil - Electrometric method
AS/NZS 4456.5:2003	Masonry units, segmental pavers and flags - Methods of test Determining the breaking load of segmental pavers and flags
AS 2150-2005	Hot mix asphalt - A guide to good practice
AS 1289.5.4.3-2006	Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Dry density ratio and moisture ratio using statistical selection of reference values
AS 1289.5.6.1-1998	Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Density index method for a cohesionless material (Reconfirmed 2016)
AS 3600-2009	Concrete structures
AS 1289.3.1.1-2009	Methods of testing soils for engineering purposes Soil classification tests - Determination of the liquid limit of a soil - Four point Casagrande method (Reconfirmed 2017)
AS 1289.5.3.2-2004	Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand pouring can, with or without a volume displacer (Reconfirmed 2016)
AS 1289.6.2.1-2001	Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the shear strength of a soil - Field test using a vane (Reconfirmed 2013)
AS 1289.2.3.1-1998	Methods of testing soils for engineering purposes Soil moisture content tests - Establishment of correlation - Subsidiary method and the standard method (Reconfirmed 2013)
AS 1289.3.8.2-2008	Methods of testing soils for engineering purposes Soil classification tests - Dispersion - Determination of the percent dispersion of a soil (Reconfirmed 2016)
AS 1379-2007	Specification and supply of concrete (Reconfirmed 2017)
AS 1289.6.7.1-2001	Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of permeability of a soil - Constant head method for a remoulded specimen (Reconfirmed 2013)
AS 1289.3.6.3-2003	Methods of testing soils for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Standard method of fine analysis using a hydrometer
AS 1289.1.4.1-1998	Methods of testing soils for engineering purposes Sampling and preparation of soils - Selection of sampling or test sites - Random number method (Reconfirmed 2013)
AS 3799-1998	Liquid membrane-forming curing compounds for concrete (Reconfirmed 2018)
AS 1289.6.1.1:2014	Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for a remoulded specimen
AS/NZS 4456.2:2003	Masonry units, segmental pavers and flags - Methods of test Assessment of mean and standard deviation (Reconfirmed 2023)
AS/NZS 4456.13:2003	Masonry units, segmental pavers and flags - Methods of test Determining pitting due to lime particles (Reconfirmed 2023)
AS/NZS 4456.1:2003	Masonry units, segmental pavers and flags - Methods of test Sampling for test (Reconfirmed 2023)
AS 1289.5.3.1-2004	Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand-cone pouring apparatus (Reconfirmed 2016)
AS 1289.7.1.3-1998	Methods of testing soils for engineering purposes Soil reactivity tests - Determination of the shrinkage index of a soil - Core shrinkage index (Reconfirmed 2013)
AS 1289.5.4.1-2007	Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio (Reconfirmed 2016)
AS 1289.6.7.2-2001	Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of permeability of a soil - Falling head method for a remoulded specimen (Reconfirmed 2013)
AS 1289.1.3.1:2015	Methods of testing soils for engineering purposes Sampling and preparation of soils - Undisturbed samples - Standard method
AS/NZS 4456.4:2003	Masonry units, segmental pavers and flags - Methods of test Determining compressive strength of masonry units
AS 1289.3.4.1-2008	Methods of testing soils for engineering purposes Soil classification tests - Determination of the linear shrinkage of a soil - Standard method
AS 1289.3.8.1-2006	Methods of testing soils for engineering purposes Soil classification tests - Dispersion - Determination of Emerson class number of a soil
AS 1289.5.8.7-1998	Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using hydrogen content of components
AS/NZS 4456.12:2003	Masonry units and segmental pavers and flags - Methods of test Determining coefficients of contraction (Reconfirmed 2023)
AS/NZS 4456.16:2003	Masonry units, segmental pavers and flags - Methods of test Determining permeability to water (Reconfirmed 2023)

View more information

US$101.03

Excluding Tax where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

AS 3727.1:2016

Pavements Residential

Abstract

General Product Information

Scope

History

Standards Referenced By This Book

Category

Subcategory