API 551 : 2016
Current
The latest, up-to-date edition.
PROCESS MEASUREMENT
Hardcopy , PDF
Russian, English
02-02-2016
1 Scope
2 Normative References
3 General
4 Temperature
5 Pressure
6 Flow
7 Level
8 Instrument Installation
9 Instrument Protection
10 Instrument Heating and Climate Protection
Bibliography
Gives recommendations about the selection and design of process measurement systems.
DevelopmentNote |
Supersedes API 550 PT1 SEC1, API 550 PT1 SEC2, API 550 PT1 SEC3, API 550 PT1 SEC4 and API 550 PT1 SEC8. (07/2002) Russian translation of 1ED 1993 is also available, see API 551 RUSSIAN. (02/2016)
|
DocumentType |
Standard
|
Pages |
244
|
ProductNote |
This product is unavailable in Cuba, Iran, North Korea, Syria
|
PublisherName |
American Petroleum Institute
|
Status |
Current
|
Supersedes |
API RP 554-3 : 2008 | PROCESS CONTROL SYSTEMS - PROJECT EXECUTION AND PROCESS CONTROL SYSTEM OWNERSHIP |
API MPM CH7 : 2001 : INC : ADD 2 : 2017 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
API 9100B : 1998 | GUIDANCE DOCUMENT FOR MODEL EHS MANAGEMENT SYSTEM |
API RP 14C : 2017 | ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES |
I.S. EN ISO 10438-1:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 1: GENERAL REQUIREMENTS |
API 554-1 : 2008(R2016) | PROCESS CONTROL SYSTEMS - PART 1: PROCESS CONTROL SYSTEMS FUNCTIONS AND FUNCTIONAL SPECIFICATION DEVELOPMENT |
API MPM CH7 : 2001 : INC : ADD 1 : 2011 : R2012 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
API MPM CH7 : 2001 : R2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
API MPM CH7 : 2001 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
UNI EN ISO 10438-1 : 2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 1: GENERAL REQUIREMENTS |
API RP 1130 : 2007(R2012) | COMPUTATIONAL PIPELINE MONITORING FOR LIQUIDS |
API MPM CH7.3:2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
API MPM CH20.5 : 2017 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20.5: RECOMMENDED PRACTICE FOR APPLICATION OF PRODUCTION WELL TESTING IN MEASUREMENT AND ALLOCATION |
API 614 REDLINE : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
API 2510 : 2001 : R2011 | DESIGN AND CONSTRUCTION OF LPG INSTALLATIONS |
ISO 10438-1:2007 | Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements |
API MPM CH7.3 SPANISH : 2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
API MPM CH7.3 : 2011(R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
API 1130 : 2007 | COMPUTATIONAL PIPELINE MONITORING FOR LIQUIDS |
API MPM CH7 : 2001 : R2012 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
API 554-3 : 2008 : R2016 | PROCESS CONTROL SYSTEMS - PROJECT EXECUTION AND PROCESS CONTROL SYSTEM OWNERSHIP |
API 554-2 : 2008 : R2016 | PROCESS CONTROL SYSTEMS - PROCESS CONTROL SYSTEM DESIGN |
BS EN ISO 10438-1:2003 | Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries General requirements |
EN ISO 10438-1:2007 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007) |
API 556 : 2011 | INSTRUMENTATION, CONTROL, AND PROTECTIVE SYSTEMS FOR GAS FIRED HEATERS |
API 556 REDLINE : 2011 | INSTRUMENTATION, CONTROL, AND PROTECTIVE SYSTEMS FOR GAS FIRED HEATERS |
API 554-2 : 2008 | PROCESS CONTROL SYSTEMS - PROCESS CONTROL SYSTEM DESIGN |
API 538 : 2015 | INDUSTRIAL FIRED BOILERS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE |
API 2510 : 2001 | DESIGN AND CONSTRUCTION OF LPG INSTALLATIONS |
API 614 : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
PIP PCEFL001 : 2017 | FLOW MEASUREMENT GUIDELINES |
PIP PCCPR001 : 2007 | PRESSURE MEASUREMENT DESIGN CRITERIA |
ASTM E 230 : 2003 | Standard Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples |
IEC 60947-5-4:2002 | Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests |
ISO/TR 15377:2007 | Measurement of fluid flow by means of pressure-differential devices Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167 |
ISA RP60.4 : 1990 | DOCUMENTATION FOR CONTROL CENTERS |
ISO/TR 12767:2007 | Measurement of fluid flow by means of pressure differential devices — Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167 |
PIP PCEFL001 : 2017 | FLOW MEASUREMENT GUIDELINES |
ISO 5167-3:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 3: Nozzles and Venturi nozzles |
API MPM CH4.9.4 : 2010 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 4: PROVING SYSTEMS - SECTION 9: METHODS OF CALIBRATION FOR DISPLACEMENT AND VOLUMETRIC TANK PROVERS - PART 4: DETERMINATION OF THE VOLUME OF DISPLACEMENT AND TANK PROVERS BY THE GRAVIMETRIC METHOD OF CALIBRATION |
ISO 4269:2001 | Petroleum and liquid petroleum products Tank calibration by liquid measurement Incremental method using volumetric meters |
ISA RP60.6 : 1984 | NAMEPLATES, LABELS AND TAGS FOR CONTROL CENTERS |
IEEE C37.90-2005 | IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus |
MSS SP 132 : 2016 | COMPRESSION PACKING SYSTEMS FOR INSTRUMENT VALVES |
IEC 60982:1989 | Level measuring systems utilizing ionizing radiation with continuous or switching output |
OIML R 84 : 2003 | PLATINUM, COPPER, AND NICKEL RESISTANCE THERMOMETERS (FOR INDUSTRIAL AND COMMERCIAL USE) |
IEC 60654-4:1987 | Operating conditions for industrial-process measurement and control equipment. Part 4: Corrosive and erosive influences |
ASTM F 2044 : 2009 | Standard Specification for Liquid Level Indicating Equipment, Electrical |
ASTM A 632 : 2004 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service |
API 560 : 2016 | FIRED HEATERS FOR GENERAL REFINERY SERVICE |
ISA RP7.1 : 1956 | PNEUMATIC CONTROL CIRCUIT PRESSURE TEST |
IEC TS 62492-1:2008 | Industrial process control devices - Radiation thermometers - Part 1: Technical data for radiation thermometers |
EN 682:2002/A1:2005 | ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS |
IEC 60381-1:1982 | Analogue signals for process control systems. Part 1: Direct current signals |
ISA RP3.2 : 1960(R1978) | FLANGED MOUNTED, SHARP EDGED ORIFICE PLATES |
BS 5288:1976 | Specification. Sealed radioactive sources |
API MPM CH7 : 2001 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
IEC 61151:1992 | Nuclear instrumentation - Amplifiers and preamplifiers used with detectors of ionizing radiation - Test procedures |
ISA RP2.1 : 1978 | MANOMETER TABLES |
EN 60405 : 2007 | NUCLEAR INSTRUMENTATION - CONSTRUCTIONAL REQUIREMENTS AND CLASSIFICATION OF RADIOMETRIC GAUGES |
IEC 61158-4-1:2014 | Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements |
SAE J 530 : 1995 | AUTOMOTIVE PIPE FITTINGS |
API MPM CH22.2 : 2017 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 22 - TESTING PROTOCOL - SECTION 2 - DIFFERENTIAL PRESSURE FLOW MEASUREMENT DEVICES |
IEEE C62.41-1991 | IEEE Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits |
IEC 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
OIML D 11 : 2013 | GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS |
IEC 60476:1993 | Nuclear instrumentation - Electrical measuring systems and instruments utilizing ionizing radiation sources - General aspects |
ASME B31.1 : 2016 | POWER PIPING |
ISO 7278-1:1987 | Liquid hydrocarbons Dynamic measurement Proving systems for volumetric meters Part 1: General principles |
DIN 43760:1987-09 | MEASUREMENT AND CONTROL - ELECTRICAL TEMPERATURE SENSORS - REFERENCES-TABLES FOR NICKEL RESISTORS FOR RESISTANCE THERMOMETERS |
ISO 7066-2:1988 | Assessment of uncertainty in the calibration and use of flow measurement devices — Part 2: Non-linear calibration relationships |
ISO 5168:2005 | Measurement of fluid flow — Procedures for the evaluation of uncertainties |
IEC 61298-2:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions |
MSS SP 99 : 2016 | INSTRUMENT VALVES |
ISO 7145:1982 | Determination of flowrate of fluids in closed conduits of circular cross-section Method of velocity measurement at one point of the cross-section |
ASME MFC6M : 1998 | MEASUREMENT OF FLUID FLOW IN PIPES USING VORTEX FLOW METERS |
ASME PTC19.1 : 2013 | TEST UNCERTAINTY |
IEC 61452:1995 | Nuclear instrumentation - Measurement of gamma-ray emission rates of radionuclides - Calibration and use of germanium spectrometers |
EN 13616:2004/AC:2006 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
ASTM A 733 : 2016 : REDLINE | Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples |
ISO 13359:1998 | Measurement of conductive liquid flow in closed conduits Flanged electromagnetic flowmeters Overall length |
API MPM CH4.7 : 2009 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 4: PROVING SYSTEMS - SECTION 7: FIELD STANDARD TEST MEASURES |
NASA KSC SPEC Z 0008 : 1978 | FABRICATION AND INSTALLATION OF FLARED TUBE ASSEMBLIES AND INSTALLATION OF FITTINGS AND FITTING ASSEMBLIES, SPECIFICATION FOR |
API MPM CH4.5 : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 4.5: MASTER METER PROVERS |
ISO 3354:2008 | Measurement of clean water flow in closed conduits — Velocity-area method using current-meters in full conduits and under regular flow conditions |
AGA XQ1304 : 2013 | ORIFICE METERING OF NATURAL GAS AND OTHER RELATED HYDROCARBON FLUIDS - CONCENTRIC, SQUARE-EDGED ORIFICE METERS - PART 3: NATURAL GAS APPLICATIONS |
IEC 61987-1:2006 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
MSS SP 83 : 2014 | CLASS 3000 AND 6000 PIPE UNIONS, SOCKET WELDING AND THREADED (CARBON STEEL, ALLOY STEEL, STAINLESS STEELS, AND NICKEL ALLOYS) |
ISO/IEC Guide 98-1:2009 | Uncertainty of measurement — Part 1: Introduction to the expression of uncertainty in measurement |
ASME MFC 26 : 2011(R2018) | MEASUREMENT OF GAS FLOW BY BELLMOUTH INLET FLOWMETERS |
ISA 84.00.01-1 : 2004 | FUNCTIONAL SAFETY: SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS |
API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
OIML G 8 : 1991 | GUIDE TO PRACTICAL - TEMPERATURE MEASUREMENTS |
ISO 9200:1993 | Crude petroleum and liquid petroleum products — Volumetric metering of viscous hydrocarbons |
ASTM D 3648 : 2014 : REDLINE | Standard Practices for the Measurement of Radioactivity (Withdrawn 2023) |
ASTM G 88 : 2013 : REDLINE | Standard Guide for Designing Systems for Oxygen Service |
IEC 60692:1999 | Nuclear instrumentation - Density gauges utilizing ionizing radiation - Definitions and test methods |
ISO 14511:2001 | Measurement of fluid flow in closed conduits Thermal mass flowmeters |
ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
ASME PCC 1 : 2013 | GUIDELINES FOR PRESSURE BOUNDARY BOLTED FLANGE JOINT ASSEMBLY |
ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
ISO 9300:2005 | Measurement of gas flow by means of critical flow Venturi nozzles |
API MPM CH14.3.3 : 2013 | ORIFICE METERING OF NATURAL GAS AND OTHER RELATED HYDROCARBON FLUIDS - CONCENTRIC, SQUARE-EDGED ORIFICE METERS - PART 3: NATURAL GAS APPLICATIONS |
IEC 60584-3:2007 | Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system |
PIP PCSIP001 : 2015 | INSTRUMENT TUBING MATERIAL SPECIFICATION |
NEMA 250 : 2014 | ENCLOSURES FOR ELECTRICAL EQUIPMENT (1000 VOLTS MAXIMUM) |
API MPM CH4.8 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 4.8: OPERATION OF PROVING SYSTEMS |
NEMA ICS 6-1993 (R2006) | Industrial Control and Systems: Enclosures |
IEC 60068-2-11:1981 | Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist |
IEC 60947-5-1 : 4.0 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES |
ASME B31.3:2016 | PROCESS PIPING |
ISO 18132-2:2008 | Refrigerated light hydrocarbon fluids — General requirements for automatic level gauges — Part 2: Gauges in refrigerated-type shore tanks |
ISA 5.06.01 : 2007 | FUNCTIONAL REQUIREMENTS DOCUMENTATION FOR CONTROL SOFTWARE APPLICATIONS |
API std 602 : 2015 | GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
IEC 60770-2:2010 | Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing |
OIML R 101 : 1991 | INDICATING AND RECORDING PRESSURE GAUGES, VACUUM GAUGES AND PRESSURE-VACUUM GAUGES WITH ELASTIC SENSING ELEMENTS (ORDINARY INSTRUMENTS) |
ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
ISO 4124:1994 | Liquid hydrocarbons — Dynamic measurement — Statistical control of volumetric metering systems |
ASME B40.100 : 2013 | Pressure Gauges and Gauge Attachments (B40.100 - 2013) |
ISO/TR 11583:2012 | Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits |
ISO 5167-4:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 4: Venturi tubes |
NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
ISO 14617-6:2002 | Graphical symbols for diagrams Part 6: Measurement and control functions |
BS 6174:1982 | Specification for differential pressure transmitters with electrical outputs |
OIML R 85-3 : 2008 | AUTOMATIC LEVEL GAUGES FOR MEASURING THE LEVEL OF LIQUID IN STATIONARY STORAGE TANKS - PART 3: REPORT FORMAT FOR TYPE EVALUATION |
ISO 11223-1:1995 | Petroleum and liquid petroleum products Direct static measurements Contents of vertical storage tanks Part 1: Mass measurement by hydrostatic tank gauging |
OIML B 3 : 2011 | OIML BASIC CERTIFICATE SYSTEM FOR OIML TYPE EVALUATION OF MEASURING INSTRUMENTS |
VDI/VDE 3513 Blatt 2:1978-12 | Variable area flowmeters; accuracy |
MIL-T-24388 Revision C:1990 | THERMOCOUPLE AND RESISTANCE TEMPERATURE ELEMENT ASSEMBLIES, GENERAL SPECIFICATION FOR (NAVAL SHIPBOARD) |
API 554-1 : 2008(R2016) | PROCESS CONTROL SYSTEMS - PART 1: PROCESS CONTROL SYSTEMS FUNCTIONS AND FUNCTIONAL SPECIFICATION DEVELOPMENT |
ASME PTC19.3 : 1974(R2004) | PERFORMANCE TEST CODE - PART 3: TEMPERATURE MEASUREMENT |
ISA RP12.4 : 1996 | PRESSURIZED ENCLOSURES |
NEMA ICS 5:2017 | Control Circuit and Pilot Devices |
IEC 62372:2006 | Nuclear instrumentation - Housed scintillators - Measurement methods of light output and intrinsic resolution |
IEC 61520:2000 | Metal thermowells for thermometer sensors - Functional dimensions |
ASTM B 743 : 2012 : REDLINE | Standard Specification for Seamless Copper Tube in Coils |
ISA RP42.00.01 : 2001 | NOMENCLATURE FOR INSTRUMENT TUBE FITTINGS |
ISO 4359:2013 | Flow measurement structures — Rectangular, trapezoidal and U-shaped flumes |
SAE AS 5304 : 2011 | STANDARD SPECIFICATION FOR TURBINE FLOWMETERS |
API 2350 : 2012 | OVERFILL PROTECTION FOR STORAGE TANKS IN PETROLEUM FACILITIES |
ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
IEC 60715:2017 | Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories |
IEC 61158-3-1:2014 | Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elements |
OIML G 1-104 : 2009 | EVALUATION OF MEASUREMENT DATA - AN INTRODUCTION TO THE "GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT" AND RELATED DOCUMENTS |
ISA TR77.42.02 : 2008 | FOSSIL FUEL POWER PLANT COMPENSATED DIFFERENTIAL PRESSURE BASED DRUM LEVEL MEASUREMENT |
API MPM CH21.2:1998 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 21: FLOW MEASUREMENT USING ELECTRONIC METERING SYSTEMS - SECTION 2: ELECTRONIC LIQUID VOLUME MEASUREMENT USING POSITIVE DISPLACEMENT AND TURBINE METERS |
ISO 5167-2:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 2: Orifice plates |
ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
API 571 : 2011 | DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY |
AGA XQ9211 : 0 | AGA REPORT NO. 3, ORIFICE METERING OF NATURAL GAS AND OTHER RELATED HYDROCARBON FLUIDS - PART 4: BACKGROUND, DEVELOPMENT, IMPLEMENTATION PROCEDURE, AND SUBROUTINE DOCUMENTATION FOR EMPIRICAL FLANGE- TAPPED DISCHARGE COEFFICIENT EQUATION |
ISO 7278-4:1999 | Liquid hydrocarbons — Dynamic measurement — Proving systems for volumetric meters — Part 4: Guide for operators of pipe provers |
ASME PV CODE 2D METRIC : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (METRIC) |
API 552 : 1994 | TRANSMISSION SYSTEMS |
AGA XQ1201 : 2012(R2017) | AGA REPORT NO. 3, ORIFICE METERING OF NATURAL GAS - PART 1: GENERAL EQUATIONS AND UNCERTAINTY GUIDELINES |
ISA RP60.2 : 1995 | CONTROL CENTER DESIGN GUIDE AND TERMINOLOGY |
IEC 61515:2016 | Mineral insulated metal-sheathed thermocouple cables and thermocouples |
ASTM F 992 : 2017 : REDLINE | Standard Specification for Valve Label Plates |
ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers |
ANSI/ISA TR77.70.01 : 2010(R2015) | TRACKING AND REPORTING OF INSTRUMENT AND CONTROL DATA |
OIML D 25 : 2010 | VORTEX METERS USED IN MEASURING SYSTEMS FOR FLUIDS |
ISO 8316:1987 | Measurement of liquid flow in closed conduits Method by collection of the liquid in a volumetric tank |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
ISO/TR 3313:1998 | Measurement of fluid flow in closed conduits Guidelines on the effects of flow pulsations on flow-measurement instruments |
ISA S7.4 : 1981 | AIR PRESSURES FOR PNEUMATIC CONTROLLERS, TRANSMITTERS, AND TRANSMISSION SYSTEMS, |
IEC 60382:1991 | Analogue pneumatic signal for process control systems |
ASTM D 7282 : 2014 : REDLINE | Standard Practice for Set-up, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements |
OIML R 137-1 : 2006 | GAS METERS - PART 1: REQUIREMENTS |
ISO 7278-2:1988 | Liquid hydrocarbons — Dynamic measurement — Proving systems for volumetric meters — Part 2: Pipe provers |
ISO 6817:1992 | Measurement of conductive liquid flow in closed conduits Method using electromagnetic flowmeters |
ISO/TR 9464:2008 | Guidelines for the use of ISO 5167:2003 |
PIP PNC00002 : 2010 | ABBREVIATED PIPING TERMS AND ACRONYMS |
ASME B36.10M : 2015 | WELDED AND SEAMLESS WROUGHT STEEL PIPE |
EN 50446:2006 | Straight thermocouple assembly with metal or ceramic protection tube and accessories |
ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
IEC 61298-3:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities |
SAE J 514 : 2012 | HYDRAULIC TUBE FITTINGS |
ISA RP16.6 : 1961 | METHODS AND EQUIPMENT FOR CALIBRATION OF VARIABLE AREA METERS (ROTAMETERS) |
ISO/TR 12765:1998 | Measurement of fluid flow in closed conduits Methods using transit-time ultrasonic flowmeters |
ASME MFC 19G : 2008 | WET GAS FLOWMETERING GUIDELINE |
CGA 4.1 : M85 AMD 94 | |
ISO 14164:1999 | Stationary source emissions — Determination of the volume flowrate of gas streams in ducts — Automated method |
IEEE C37.90.1-2012 | IEEE Standard for Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus |
ASME PV CODE 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS |
API 5A3 : 2011 | RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS |
NFPA 51 : 2018 | DESIGN AND INSTALLATION OF OXYGEN-FUEL GAS SYSTEMS FOR WELDING, CUTTING, AND ALLIED PROCESSES |
OIML D 8 : 2004 | MEASUREMENT STANDARDS. CHOICE, RECOGNITION, USE, CONSERVATION AND DOCUMENTATION |
API HDVSF : 2007 | VORTEX SHEDDING FLOWMETER FOR MEASUREMENT OF HYDROCARBON FLUIDS |
MSS SP 95 : 2014 | SWAGE(D) NIPPLES AND BULL PLUGS |
IEC 60751:2008 | Industrial platinum resistance thermometers and platinum temperature sensors |
ISO 10790:2015 | Measurement of fluid flow in closed conduits Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements) |
ISO 13703:2000 | Petroleum and natural gas industries Design and installation of piping systems on offshore production platforms |
ISO 7278-3:1998 | Liquid hydrocarbons Dynamic measurement Proving systems for volumetric meters Part 3: Pulse interpolation techniques |
OIML R 119 : 1996 | PIPE PROVERS FOR TESTING MEASURING SYSTEMS FOR LIQUIDS OTHER THAN WATER |
ASME MFC 3M : 2004 | MEASUREMENT OF FLUID FLOW IN PIPES USING ORIFICE, NOZZLE, AND VENTURI |
OIML D 2 : 2007 | LEGAL UNITS OF MEASUREMENT |
ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
ISA 37.1 : 1975 | ELECTRICAL TRANSDUCER NOMENCLATURE AND TERMINOLOGY |
OIML R 34 : 1974 | ACCURACY CLASSES OF MEASURING INSTRUMENTS |
OIML R 109 : 1993 | PRESSURE GAUGES AND VACUUM GAUGES WITH ELASTIC SENSING ELEMENTS (STANDARD INSTRUMENTS) |
ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
API MPM CH21.1 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 21.1: FLOW MEASUREMENT USING ELECTRONIC METERING SYSTEMS - ELECTRONIC GAS MEASUREMENT |
OIML R 81 : 1998 | DYNAMIC MEASURING DEVICES AND SYSTEMS FOR CRYOGENIC LIQUIDS |
(INACTIVE RECORD)IEEE 398 : 1972 | PHOTOMULTIPLIERS FOR SCINTILLATION COUNTING AND GLOSSARY FOR SCINTILLATION COUNTING FIELD, TEST PROCEDURES FOR |
NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
ASTM G 63 : 2015 : REDLINE | Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service |
ISO 15212-2:2002 | Oscillation-type density meters Part 2: Process instruments for homogeneous liquids |
ASME PTC19.3 TW : 2016 | THERMOWELLS |
ISO 2919:2012 | Radiological protection — Sealed radioactive sources — General requirements and classification |
OIML R 105 : 1993 | DIRECT MASS FLOW MEASURING SYSTEMS FOR QUANTITIES OF LIQUIDS |
OIML G 1-101 : 2008 | EVALUATION OF MEASUREMENT DATA - SUPPLEMENT 1 TO THE "GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT" - PROPAGATION OF DISTRIBUTIONS USING A MONTE CARLO METHOD |
ISO/TR 7066-1:1997 | Assessment of uncertainty in calibration and use of flow measurement devices — Part 1: Linear calibration relationships |
ISO 7194:2008 | Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes |
IEC 60947-5-2:2007+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 5-2: Control circuitdevices and switching elements - Proximity switches |
API MPM CH5.8 : 2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 5.8: MEASUREMENT OF LIQUID HYDROCARBONS BY ULTRASONIC FLOW METERS |
ASME MFC 16M : 1995 | MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS BY MEANS OF ELECTROMAGNETIC FLOWMETERS |
NAMUR NE 106 : 2007 | TEST INTERVALS OF SAFETY INSTRUMENTED SYSTEMS |
ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
ISA RP16.4 : 1960 | NOMENCLATURE AND TERMINOLOGY FOR EXTENSION-TYPE VARIABLE AREA METERS (ROTAMETERS) |
PIP PCCPR001 : 2007 | PRESSURE MEASUREMENT DESIGN CRITERIA |
IEC 60381-2:1978 | Analogue signals for process control systems. Part 2: Direct voltage signals |
IEC 61306:1994 | Nuclear instrumentation - Microprocessor based nuclear radiation measuring devices |
OIML D 20 : 1988 | INITIAL AND SUBSEQUENT VERIFICATION OF MEASURING INSTRUMENTS AND PROCESSES |
ISO 17089-1:2010 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement |
ASME MFC 5.1 : 2011(R2018) | MEASUREMENT OF LIQUID FLOW IN CLOSED CONDUITS USING TRANSIT-TIME ULTRASONIC FLOWMETERS |
ASME PV CODE 2D CUSTOMARY : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (CUSTOMARY) |
OIML G 1-100 : 2008 | EVALUATION OF MEASUREMENT DATA - GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
IEC 60947-5-7:2003 | Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output |
ISO 14617-5:2002 | Graphical symbols for diagrams Part 5: Measurement and control devices |
BS 3463:1975 | Specification for observation and gauge glasses for pressure vessels |
EN 837-1:1996/AC:1998 | PRESSURE GAUGES - BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING |
IEC 62598:2011 | Nuclear instrumentation - Constructional requirements and classification of radiometric gauges |
SAE AIR 6202 : 2012 | TEST CELL MASS FUEL FLOW MEASUREMENT USING CORIOLIS FLOW METERS |
API MPM CH22.1 : 2015 | Testing Protocols - General Guidelines for Developing Testing Protocols for Devices Used in the Measurement of Hydrocarbon Fluids |
EN 837-2:1997 | Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges |
ISO/TR 12764:1997 | Measurement of fluid flow in closed conduits Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
ISO 2186:2007 | Fluid flow in closed conduits — Connections for pressure signal transmissions between primary and secondary elements |
ISO 2715:1981 | Liquid hydrocarbons Volumetric measurement by turbine meter systems |
OIML D 24 : 1996 | TOTAL RADIATION PYROMETERS |
ISO 11631:1998 | Measurement of fluid flow Methods of specifying flowmeter performance |
API MPM CH1 : 1994 | Manual of Petroleum Measurement Standards - Chapter 1: Vocabulary |
IEEE 515-2011 | IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications |
ISA RP16.5 : 1961 | INSTALLATION, OPERATION, MAINTENANCE INSTRUCTIONS FOR GLASS TUBE VARIABLE AREA METERS (ROTAMETERS) |
EN 837-3:1996 | Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing |
ISO 3966:2008 | Measurement of fluid flow in closed conduits Velocity area method using Pitot static tubes |
IEC 61152:1992 | Dimensions of metal-sheathed thermometer elements |
API MPM CH14.7 : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 14 - NATURAL GAS FLUIDS MEASUREMENT - SECTION 7 - MASS MEASUREMENT OF NATURAL GAS LIQUIDS AND OTHER HYDROCARBONS |
ISA 50.00.01 : 1975 | COMPATIBILITY OF ANALOG SIGNALS FOR ELECTRONIC INDUSTRIAL PROCESS INSTRUMENTS |
API 556 : 2011 | INSTRUMENTATION, CONTROL, AND PROTECTIVE SYSTEMS FOR GAS FIRED HEATERS |
ASTM E 1350 : 2013-08 | GUIDE FOR TESTING SHEATHED THERMOCOUPLES, THERMOCOUPLES ASSEMBLIES, AND CONNECTING WIRES PRIOR TO, AND AFTER INSTALLATION OR SERVICE |
IEC 60770-3:2014 | Transmitters for use in industrial-process control systems - Part 3: Methods for performance evaluation of intelligent transmitters |
SAE ARP 4990B : 2015 | TURBINE FLOWMETER FUEL FLOW CALCULATIONS |
ISA 51.1 : 1979 | PROCESS INSTRUMENTATION TERMINOLOGY |
OIML G 1-106 : 2012 | EVALUATION OF MEASUREMENT DATA - THE ROLE OF MEASUREMENT UNCERTAINTY IN CONFORMITY ASSESSMENT |
ISA 71.04 : 1985 | ENVIRONMENTAL CONDITIONS FOR PROCESS MEASUREMENT AND CONTROL SYSTEMS: AIRBORNE CONTAMINANTS |
API TR 2571 : 2011 | FUEL GAS MEASUREMENT |
ISO/TR 9824:2007 | Hydrometry Measurement of free surface flow in closed conduits |
OIML R 140 : 2007 | MEASURING SYSTEMS FOR GASEOUS FUEL |
EN 13352:2012 | Specification for the performance of automatic tank contents gauges |
ISA 5.1 : 1984 | INSTRUMENTATION SYMBOLS AND IDENTIFICATION |
API MPM CH20.3 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20: ALLOCATION MEASUREMENT - SECTION 3: MEASUREMENT OF MULTIPLE FLOW |
AGA XQ0308 : 2003 | THE THEORY AND OPERATIONS OF METER SHOP SONIC NOZZLE PROVING SYSTEMS FOR THE NATURAL GAS INDUSTRY |
BS 6447:1984 | Specification for absolute and gauge pressure transmitters with electrical outputs |
API MPM CH3.1B : 2001 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 1B - STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY TANKS BY AUTOMATIC TANK GAUGING |
ISA TR20.00.01 : 2006 | SPECIFICATION FORMS FOR PROCESS MEASUREMENT AND CONTROL INSTRUMENTS - PART 1: GENERAL CONSIDERATIONS |
ASTM E 1137 : 1997 | Standard Specification for Industrial Platinum Resistance Thermometers |
IEC 61987-10:2009 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 10: List of Properties (LOPs) for Industrial-Process Measurement and Control for Electronic Data Exchange - Fundamentals |
ASTM B 912 : 2002 | Standard Specification for Passivation of Stainless Steels Using Electropolishing |
ISO 9104:1991 | Measurement of fluid flow in closed conduits Methods of evaluating the performance of electromagnetic flow-meters for liquids |
API 2218 : 2013 | FIREPROOFING PRACTICES IN PETROLEUM AND PETROCHEMICAL PROCESSING PLANTS |
IEC 61518:2001 | Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa) |
IEC 60947-5-6:1999 | Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR) |
AGA REPORT 7 : 1996 | MEASUREMENT OF GAS BY TURBINE METERS |
ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
MSS SP 105 : 2016 | INSTRUMENT VALVES FOR CODE APPLICATIONS |
OIML G 1-102 : 2011 | EVALUATION OF MEASUREMENT DATA - SUPPLEMENT 2 TO THE "GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT" - EXTENSION TO ANY NUMBER OF OUTPUT QUANTITIES |
IEC 61336:1996 | Nuclear instrumentation - Thickness measurement systems utilizingionizing radiation - Definitions and test methods |
SAE J 476 : 2013 | DRYSEAL PIPE THREADS |
MSS SP 130 : 2013 | BELLOWS SEALS FOR INSTRUMENT VALVES |
API 751 : 2013 | SAFE OPERATION OF HYDROFLUORIC ACID ALKYLATION UNITS |
IEC 60770-1:2010 | Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation |
ASTM E 2181/E2181M : 2011 | Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable |
ASTM D 1418 : 2017 : REDLINE | Standard Practice for Rubber and Rubber Latices—Nomenclature |
API MPM CH14.3.2 : 2016 | ORIFICE METERING OF NATURAL GAS AND OTHER RELATED HYDROCARBON FLUIDS - CONCENTRIC, SQUARE-EDGED ORIFICE METERS - PART 2: SPECIFICATION AND INSTALLATION REQUIREMENTS |
API MPM CH8.2 : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.2: STANDARD PRACTICE FOR AUTOMATIC SAMPLING OF PETROLEUM AND PETROLEUM PRODUCTS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.