![header thumbnail](/images/publishers\din_cover.gif)
DIN EN 10088-3:2014-12
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\din_cover.gif)
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Hardcopy , PDF
01-04-2024
German, English
01-12-2014
National foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designation and ordering
5 Classification of grades
6 Requirements
7 Inspection and testing
8 Marking
Annex A (informative) - Guidelines for further treatment
(including heat treatment) in fabrication
Annex B (informative) - Availability of corrosion resistant
steel wire in the cold work-hardened condition
Annex C (informative) - Applicable dimensional standards
Bibliography
This Standard is included in DIN Handbook 405 E. Defines the technical delivery conditions for semi-finished products, hot or cold formed bars, rods, wire, sections and bright products of standard grades and special grades of corrosion resisting stainless steels for general purposes.
DevelopmentNote |
Supersedes DIN 17440 E. (01/2006)
|
DocumentType |
Standard
|
Pages |
60
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
EN 10088-3:2014 | Identical |
NBN EN 10088-3 : 2014 | Identical |
SN EN 10088-3 : 2014 | Identical |
I.S. EN 10088-3:2014 | Identical |
UNI EN 10088-3 : 2014 | Identical |
NS EN 10088-3 : 2014 | Identical |
NEN EN 10088-3 : 2014 | Identical |
UNE-EN 10088-3:2015 | Identical |
BS EN 10088-3:2014 | Identical |
NF EN 10088-3 : 2014 | Identical |
ONORM EN 10088-3 : 2014 | Identical |
DIN 4935-1:2002-06 | STAINLESS STEEL WIRE WRAPPED WELL SCREENS - PART 1: SIZES DN 40 TO DN 100 THREADED SCREENS WITH CONTINUOUS SLOT |
DIN 4935-3:2002-06 | STAINLESS STEEL WIRE WRAPPED WELL SCREENS - PART 3: SIZES DN 500 TO DN 1000 FLANGED SCREENS WITH CONTINUOUS SLOT |
DIN 4140:1996-11 | INSULATION WORK ON INDUSTRIAL INSTALLATIONS AND BUILDING EQUIPMENT - EXECUTION OF THERMAL AND COLD INSULATIONS |
DIN 4935-2:2002-06 | STAINLESS STEEL WIRE WRAPPED WELL SCREENS - PART 2: SIZES DN 100 TO DN 500 THREADED SCREENS WITH CONTINUOUS SLOT |
DIN 18338:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - ROOFING WORK |
DIN 5401:2002-08 | FINISHED STEEL BALLS FOR ROLLING BEARINGS |
DIN 546:2010-09 | Slotted round nuts |
EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
EN ISO 286-1:2010/AC:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010/COR 1:2013) |
EN 10079:2007 | Definition of steel products |
EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
EN 10270-3:2011 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
EN 10221:1995 | Surface quality classes for hot-rolled bars and rods - Technical delivery conditions |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
ISO 15510:2014 | Stainless steels Chemical composition |
EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN 10264-4:2012 | Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire |
ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
EN 10308:2001 | Non destructive testing - Ultrasonic testing of steel bars |
EN 10306:2001 | Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams |
EN 10272:2016 | Stainless steel bars for pressure purposes |
EN 10021:2006 | General technical delivery conditions for steel products |
ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
EN 10163-3:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
EN 10302:2008 | Creep resisting steels, nickel and cobalt alloys |
ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.