ASTM F 1807 : 2011
|
Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM F 3347 : 2020 : REV A
|
Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM F 876 : 2022 : REV A : EDT 1
|
Standard Specification for Crosslinked Polyethylene (PEX) Tubing
|
ASTM F 1960 : 2023
|
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM F 3347 : 2023
|
Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM F 412 : 2020 : REV A
|
Standard Terminology Relating to Plastic Piping Systems
|
ASTM F 2023 : 2015
|
Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water
|
ASTM D 1598 : 2015 : REV A
|
Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
|
ASTM F 412 : 2021
|
Standard Terminology Relating to Plastic Piping Systems
|
ASTM F 877 : 2018 : REV A
|
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
|
ASTM F 876 : 2022 : REV A
|
Standard Specification for Crosslinked Polyethylene (PEX) Tubing
|
ASTM F 1807 : 2019 : REV B
|
Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM F 3347 : 2020
|
Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing
|
ASTM F 3348 : 2022
|
Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM D 2837 : 2021
|
Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
|
ASTM F 876 : 2022
|
Standard Specification for Crosslinked Polyethylene (PEX) Tubing
|
ASTM F 1960 : 2020
|
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM F 1865 : 1998
|
Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing
|
ASTM F 2735 : 2021
|
Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM F 1807 : 2023
|
Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM F 877 : 2022
|
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
|
ASTM F 3347 : 2022
|
Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM F 3348 : 2023
|
Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM F 2023 : 2021
|
Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water
|
ASTM F 2657 : 2007 : R2018
|
Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
|
ASTM D 1598 : 1997
|
Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
|
ASTM F 876 : 2003
|
Standard Specification for Crosslinked Polyethylene (PEX) Tubing
|
ASTM F 1281 : 2017 : R2021 : EDT 1
|
Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
|
ASTM F 3347 : 2019 : REV A
|
Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing
|
ASTM F 3348 : 2020 : REV B
|
Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM F 1960 : 2021
|
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM F 1281 : 2017
|
Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
|
ASTM F 2159 : 2021
|
Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM F 2735 : 2020
|
Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM D 2837 : 2022
|
Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
|
ASTM F 2159 : 2023 : REV A
|
Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM F 877 : 2023
|
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
|
ASTM F 3348 : 2021 : REV A
|
Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM D 2122 : 2022
|
Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
|
ASTM D 618 : 2013
|
Standard Practice for Conditioning Plastics for Testing
|
ASTM F 877 : 2020
|
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
|
ASTM D 1598 : 2021
|
Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
|
ASTM F 2080 : 2023
|
Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe
|
ASTM F 876 : 2023
|
Standard Specification for Crosslinked Polyethylene (PEX) Tubing
|
ASTM D 2122 : 2016
|
Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
|
ASTM F 1960 : 2022
|
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM F 3348 : 2021
|
Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM F 3347 : 2021
|
Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM D 2749 : 2022
|
Standard Symbols for Dimensions of Plastic Pipe Fittings
|
ASTM F 2657 : 2021
|
Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
|
ASTM D 2749 : 2013
|
Standard Symbols for Dimensions of Plastic Pipe Fittings (Withdrawn 2022)
|
ASTM F 1281 : 2023
|
Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
|
ASTM F 2159 : 2023
|
Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM F 3348 : 2019
|
Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing
|
ASTM F 876 : 2020 : REV B
|
Standard Specification for Crosslinked Polyethylene (PEX) Tubing
|
ASTM D 618 : 2021
|
Standard Practice for Conditioning Plastics for Testing
|
ASTM F 3348 : 2020
|
Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing
|
ASTM F 2080 : 2019
|
Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe
|
ASTM F 2159 : 2020
|
Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM D 2837 : 2013 : EDT 1
|
Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
|