ASTM D 8111 : 2023
|
Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine
|
ASTM D 8147 : 2017
|
Standard Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines
|
ASTM D 1838 : 2021
|
Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
|
ASTM D 7618 : 2013 : R2021
|
Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel
|
ASTM D 8235 : 2021
|
Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
|
ASTM D 2251 : 2010 : R2020
|
Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures
|
ASTM D 268 : 2022
|
Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
|
ASTM D 8324 : 2021
|
Standard Guide for Selection of Environmentally Acceptable Lubricants for the U.S. Environmental Protection Agency (EPA) Vessel General Permit
|
ASTM D 396 : 2021
|
Standard Specification for Fuel Oils
|
ASTM D 4304 : 2022
|
Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines
|
ASTM D 7547 : 2021
|
Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
|
ASTM D 7450 : 2019
|
Standard Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service
|
ASTM D 5853 : 2017 : REV A
|
Standard Test Method for Pour Point of Crude Oils
|
ASTM D 7223 : 2021
|
Standard Specification for Aviation Certification Turbine Fuel
|
ASTM D 7566 : 2022 : REV A
|
Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
|
ASTM D 6593 : 2018 : EDT 1
|
Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
|
ASTM D 8275 : 2022
|
Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines
|
ASTM D 7467 : 2020 : REV A
|
Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
|
ASTM D 5967 : 2021
|
Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
|
ASTM D 8029 : 2018
|
Standard Specification for Biodegradable, Low Aquatic Toxicity Hydraulic Fluids
|
ASTM D 8291 : 2021 : REV A : EDT 1
|
Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engine
|
ASTM D 3735 : 2022
|
Standard Specification for VM&P Naphthas
|
ASTM D 6074 : 2015 : R2022
|
Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
|
ASTM D 849 : 2015 : R2019 : EDT 1
|
Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
|
ASTM D 5797 : 2021
|
Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines
|
ASTM D 7583 : 2016
|
Standard Test Method for John Deere Coolant Cavitation Test
|
ASTM D 5760 : 2019
|
Standard Specification for Performance of Manual Transmission Gear Lubricants
|
ASTM D 4378 : 2022
|
Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
|
ASTM D 6469 : 2020
|
Standard Guide for Microbial Contamination in Fuels and Fuel Systems
|
ASTM D 5966 : 2022
|
Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine
|
ASTM D 5968 : 2019 : REV A : EDT 1
|
Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121 °C
|
ASTM D 7320 : 2018 : EDT 1
|
Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
|
ASTM D 8434 : 2021
|
Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Organo-metallic Additive
|
ASTM D 1275 : 2015
|
Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids
|
ASTM D 7549 : 2021
|
Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure
|
ASTM D 7667 : 2021
|
Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method
|
ASTM B 813 : 2016
|
Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
|
ASTM D 7778 : 2015 : R2022 : EDT 1
|
Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
|
ASTM D 6681 : 2017
|
Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure
|
ASTM D 7960 : 2021
|
Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components
|
ASTM D 7468 : 2022
|
Standard Test Method for Cummins ISM Test
|
ASTM D 7484 : 2023
|
Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
|
ASTM D 8181 : 2019
|
Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils
|
ASTM D 6923 : 2018
|
Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure
|
ASTM D 6984 : 2018 : EDT 1
|
Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
|
ASTM D 6615 : 2022
|
Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
|
ASTM D 975 : 2022 : REV A
|
Standard Specification for Diesel Fuel
|
ASTM D 2619 : 2021
|
Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
|
ASTM D 6750 : 2019 : EDT 1
|
Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
|
ASTM D 3699 : 2019
|
Standard Specification for Kerosine
|
ASTM D 8048 : 2021 : REV A : EDT 1
|
Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine
|
ASTM D 7156 : 2019
|
Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
|
ASTM D 7719 : 2021 : REV A
|
Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline Test Fuel
|
ASTM D 6227 : 2018
|
Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
|
ASTM D 7671 : 2021
|
Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method
|
ASTM D 7973 : 2019
|
Standard Guide for Monitoring Failure Mode Progression in Plain Bearings
|
ASTM D 4293 : 2022
|
Standard Specification for Phosphate Ester-Based Fluids for Turbine Lubrication and Steam Turbine Electro-Hydraulic Control (EHC) Applications
|
ASTM D 7422 : 2022
|
Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
|
ASTM D 7752 : 2018
|
Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids
|
ASTM D 4048 : 2022
|
Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
|
ASTM D 235 : 2022
|
Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
|
ASTM D 8074 : 2022
|
Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
|
ASTM D 7826 : 2022
|
Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
|
ASTM D 4485 : 2022 : EDT 1
|
Standard Specification for Performance of Active API Service Category Engine Oils
|
ASTM D 8076 : 2021 : REV B
|
Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
|
ASTM D 6709 : 2022
|
Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
|
ASTM D 1662 : 2019
|
Standard Test Method for Active Sulfur in Cutting Oils
|
ASTM D 6594 : 2020 : EDT 1
|
Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135 °C
|
ASTM D 6158 : 2018
|
Standard Specification for Mineral Hydraulic Oils
|
ASTM D 7155 : 2020
|
Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
|
ASTM D 4814 : 2022
|
Standard Specification for Automotive Spark-Ignition Engine Fuel
|
ASTM D 1655 : 2022 : REV A
|
Standard Specification for Aviation Turbine Fuels
|
ASTM F 715 : 2007 : R2018
|
Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage
|
ASTM D 910 : 2021
|
Standard Specification for Leaded Aviation Gasolines
|
ASTM D 5798 : 2021
|
Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
|
ASTM D 6618 : 2016
|
Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine
|
ASTM D 7095 : 2017
|
Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
|