PREN 4641-102 : 200P1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD
Hardcopy , PDF
14-06-2024
English
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Required characteristics
5 Cable construction
6 Materials
7 Test methods and performances
8 Tooling
9 Quality assurance
10 Designation, marking and colours
11 Delivery conditions
12 Storage
Specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with a 62,5/125 [mu]m Graded Index fibre nominal, 1,8 mm outside diameter and of semi-loose buffer construction.
DocumentType |
Draft
|
Pages |
12
|
ProductNote |
Superseded by EN 4641-102:2009
|
PublisherName |
Aerospace & Defence Industries Association of Europe
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NF EN 4641-102 : 2009 | Identical |
DIN EN 4641-102:2009-10 | Identical |
06/30157460 DC : 0 | Identical |
PREN 4640-002 : 200P1 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, RACK AND PANEL, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 002: LIST OF PRODUCT STANDARDS |
PREN 4645-002 : 200P1 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, SELF-LOCKING 1,25 MM DIAMETER FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
PREN 4641-104 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 104: SEMI-LOOSE, RUGGEDIZED DUPLEX CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL, 4,95 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
PREN 4641-105 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 105: SEMI-LOOSE, RUGGEDIZED QUADRAXIAL CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL, 5,72 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
PREN 4830-002 : DRAFT 2014 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, OPERATING TEMPERATURE 125 DEGREES C, FOR EN 4639-10X CONTACTS - PART 002: SPECIFICATION OF PERFORMANCE |
PREN 4641-103 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 103: SEMI-LOOSE, RUGGEDIZED SIMPLEX CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL 2,74 MM, OUTSIDE DIAMETER - PRODUCT STANDARD |
BS EN 4639-002:2007 | Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder List of product standards |
BS EN 4639-102:2007 | Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Optical contact for cable EN 4641-102. Operating temperatures between -55°C and 100°C. Product standard |
EN 4639-102:2007 | Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 102: Optical contact for cable EN 4641-102 - Operating temperatures between - 55 °C and 100 °C - Product standard |
EN 4639-002:2007 | Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 002: List of product standards |
EN 4640-002:2009 | Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 002: List of product standards |
TR 4647 : 1 | AEROSPACE SERIES - TERMINATION PROCEDURE FOR EN 4639 OPTICAL CONTACT |
I.S. EN 4640-002:2009 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, RACK AND PANEL, MULTI CONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 002: LIST OF PRODUCT STANDARDS |
BS EN 4640-002:2009 | Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder List of product standards |
EN 3475-703:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 703: Permanence of manufacturer's marking |
EN 3745-305:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 305: Immunity to ambient light coupling |
SAE AMS 1428 : 2017 | FLUID, AIRCRAFT DEICING/ANTI-ICING, NON-NEWTONIAN, (PSEUDOPLASTIC), SAE TYPES 2, 3 AND 4 |
EN 3745-512:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 512: Flexure endurance |
PREN 2812 : 200P3 | AEROSPACE SERIES - STRIPPING OF ELECTRIC CABLES |
EN 3745-202:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensions |
EN 3745-504:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 504: Micro bending test |
EN 3745-509:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 509: Kink test |
EN 3745-301:2012 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301: Attenuation |
TR 4647 : 1 | AEROSPACE SERIES - TERMINATION PROCEDURE FOR EN 4639 OPTICAL CONTACT |
MIL-PRF-87252 Revision D:2015 | COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC |
EN 3745-404:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock |
EN 3475-515:2009 | Aerospace series - Cable, electrical, aircraft use - Test methods - Part 515: Crush resistance |
EN 3745-503:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion |
EN 3475-602:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity |
EN 3745-411:2007 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 411: Resistance to fluids |
STANAG 3748 : 1995 | HYDRAULIC FLUIDS, PETROLEUM (H-515, H-520 AND C-635) AND POLYALPHAOLEFIN (H-537, H-538 AND H-544) |
EN 3745-306:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling |
EN 3745-513:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513: Crush resistance |
EN 3745-100:2008 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 100: General |
EN 3745-507:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 507: Cut-through |
PREN 3745-514 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE TEST METHODS - PART 514: CABLE TWIST BEND |
EN 3745-505:2007 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength |
EN 3745-406:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold bend test |
PREN 3909 : 200P3 | AEROSPACE SERIES - TEST FLUIDS FOR ELECTRICAL AND OPTICAL COMPONENTS AND SUB-ASSEMBLIES |
EN 3745-501:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 501: Optical fibre proof test |
EN 3475-601:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density |
PREN 3745-203 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 203: CABLE DIMENSIONS |
EN 3745-201:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 201: Visual examination |
EN 3745-402:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling |
ISO 11078:2007 | Aircraft De-icing/anti-icing fluids ISO types II, III and IV |
EN 3475-706:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 706: Laser markability |
EN 2424:2008 | Aerospace series - Marking of aerospace products |
EN 3745-412:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance |
PREN 4641-001 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 001: TECHNICAL SPECIFICATION |
EN 3745-401:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 401: Accelerated ageing |
PREN 3745-506 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 506: IMPACT RESISTANCE |
PREN 3475-601 : 200P2 | AEROSPACE SERIES - CABLES, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 601: SMOKE DENSITY |
PREN 3838 : 200P2 | AEROSPACE SERIES - REQUIREMENTS AND TESTS ON USER-APPLIED MARKINGS ON AIRCRAFT ELECTRICAL CABLES |
EN 3745-511:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 511: Cable to cable abrasion |
ISO 11075:2007 | Aircraft De-icing/anti-icing fluids ISO type I |
EN 3745-405:2012 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test |
EN 3745-410:2015 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life |
EN 3745-508:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 508: Torsion |
EN 3475-705:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement |
EN 3475-701:2017 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701: Strippability and adherence of insulation to the conductor |
EN 3745-510:2017 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test |
EN 3745-303:2007 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 303: Bandwidth |
EN 3745-302 : 2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 302: Numerical aperture |
ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
EN 3475-603:2011/AC:2011 | AEROSPACE SERIES - CABLES, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 603: RESISTANCE TO WET ARC TRACKING |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.