ASTM D 2872 : 2019
|
Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
|
ASTM D 139 : 2016
|
Standard Test Method for Float Test for Bituminous Materials
|
ASTM D 7115 : 2010 : R2015
|
Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
|
ASTM D 3744/D3744M : 2018
|
Standard Test Method for Aggregate Durability Index
|
ASTM D 7552 : 2009 : R2014
|
Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer
|
ASTM D 7196 : 2018
|
Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples
|
ASTM D 2042 : 2015
|
Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
|
ASTM D 75/D75M : 2014
|
Standard Practice for Sampling Aggregates
|
ASTM D 3042 : 2017
|
Standard Test Method for Insoluble Residue in Carbonate Aggregates
|
ASTM D 8237 : 2018
|
Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures With the Four-Point Beam Fatigue Device
|
ASTM D 3143/D3143M : 2019
|
Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
|
ASTM D 7981 : 2015
|
Standard Practice for Compaction of Prismatic Asphalt Specimens by Means of the Shear Box Compactor
|
ASTM D 70 : 2018 : REV A
|
Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)
|
ASTM D 7906 : 2014
|
Standard Practice for Recovery of Asphalt from Solution Using Toluene and the Rotary Evaporator
|
ASTM D 5404/D5404M : 2012 : R2017
|
Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
|
ASTM D 7495 : 2012 : R2019
|
Standard Specification for Minimum Requirements for Accreditation Bodies That Accredit Agencies Testing and Inspecting Road and Paving Materials
|
ASTM D 6752/D6752M : 2018
|
Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
|
ASTM D 1560 : 2015
|
Standard Test Methods for Resistance to Deformation and Cohesion of Asphalt Mixtures by Means of Hveem Apparatus (Withdrawn 2024)
|
ASTM D 3319 : 2011 : R2017
|
Standard Practice for the Accelerated Polishing of Aggregates Using the British Wheel
|
ASTM D 7064/D7064M : 2008 : R2013
|
Standard Practice for Open-Graded Friction Course (OGFC) Mix Design
|
ASTM D 1461 : 2017
|
Standard Test Method for Moisture or Volatile Distillates in Asphalt Mixtures
|
ASTM D 8079 : 2016
|
Standard Practice for Preparation of Compacted Slab Asphalt Mix Samples Using a Segmented Rolling Compactor
|
ASTM D 6521 : 2019
|
Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
|
ASTM D 8225 : 2019
|
Standard Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature
|
ASTM D 7369 : 2011
|
Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test (Withdrawn 2020)
|
ASTM D 7313 : 2013
|
Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry
|
ASTM D 5801 : 2017
|
Standard Test Method for Toughness and Tenacity of Asphalt Materials
|
ASTM D 7113/D7113M : 2010 : R2016
|
Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
|
ASTM D 2170/D2170M : 2018
|
Standard Test Method for Kinematic Viscosity of Asphalts
|
ASTM D 3740 : 2012 : REV A
|
Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
|
ASTM D 2419 : 2014
|
Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
|
ASTM D 4957 : 2018
|
Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Asphalts by Vacuum Capillary Viscometer
|
ASTM D 2171/D2171M : 2018
|
Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
|
ASTM D 2041/D2041M : 2019
|
Standard Test Method for Theoretical Maximum Specific Gravity and Density of Asphalt Mixtures
|
ASTM D 8078 : 2018
|
Standard Test Method for Ash Content of Asphalt and Emulsified Asphalt Residues
|
ASTM D 113 : 2017
|
Standard Test Method for Ductility of Asphalt Materials
|
ASTM D 8055 : 2017
|
Standard Guide for Selecting an Appropriate Electronic Thermometer for Replacing Mercury Thermometers in D04 Road and Paving Standards
|
ASTM E 329 : 2018
|
Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
|
ASTM D 6927 : 2015
|
Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures
|
ASTM D 7370/D7370M : 2014
|
Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
|
ASTM D 4792/D4792M : 2013 : R2019
|
Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions
|
ASTM D 7870/D7870M : 2013
|
Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure
|
ASTM D 1754/D1754M : 2009 : R2014
|
Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
|
ASTM D 2172/D2172M : 2017 : EDT 1
|
Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures
|
ASTM D 6931 : 2017
|
Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures
|
ASTM D 7227/D7227M : 2017
|
Standard Practice for Rapid Drying of Compacted Asphalt Mixture Specimens Using Vacuum Drying Apparatus
|
ASTM D 6926 : 2016
|
Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus
|
ASTM D 3549/D3549M : 2018
|
Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens
|
ASTM D 3203/D3203M : 2017
|
Standard Test Method for Percent Air Voids in Compacted Asphalt Mixtures
|
ASTM D 1561/D1561M : 2013
|
Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor (Withdrawn 2022)
|
ASTM D 6857/D6857M : 2018
|
Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
|
ASTM D 1074 : 2017
|
Standard Test Method for Compressive Strength of Asphalt Mixtures
|
ASTM D 6936 : 2017
|
Standard Test Method for Determining Demulsibility of Emulsified Asphalt
|
ASTM D 6932/D6932M : 2008 : R2013
|
Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures
|
ASTM D 7063/D7063M : 2018
|
Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples
|
ASTM D 3387 : 2011
|
Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM) (Withdrawn 2020)
|
ASTM D 6925 : 2015
|
Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor
|
ASTM D 7553 : 2015
|
Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide
|
ASTM D 5361/D5361M : 2016
|
Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
|
ASTM D 2726/D2726M : 2019
|
Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
|
ASTM D 5/D5M : 2019
|
Standard Test Method for Penetration of Bituminous Materials
|
ASTM D 6933 : 2018
|
Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
|
ASTM D 8044 : 2016
|
Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
|