ASTM D 2672 : 2014
|
Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement
|
ASTM F 439 : 2013
|
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
|
ASTM F 2623 : 2019
|
Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
|
ASTM D 2466 : 2017
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
|
ASTM F 1974 : 2009 : R2015
|
Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
|
ASTM F 2896 : 2011 : R2017
|
Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids
|
ASTM F 2769 : 2018
|
Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
|
ASTM D 2517 : 2018
|
Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
|
ASTM F 2929 : 2017
|
Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
|
ASTM F 1173 : 2001 : R2018
|
Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
|
ASTM F 2600 : 2009 : R2018
|
Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing
|
ASTM D 3261 : 2016
|
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
|
ASTM D 2997 : 2015
|
Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
|
ASTM F 1733 : 2013
|
Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
|
ASTM F 1483 : 2017
|
Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
|
ASTM F 493 : 2014
|
Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
|
ASTM F 2969 : 2012
|
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe
|
ASTM D 2464 : 2015
|
Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
|
ASTM F 441/F441M : 2015
|
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
|
ASTM D 3035 : 2015
|
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
|
ASTM D 5421 : 2015
|
Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
|
ASTM F 2968/F2968M : 2014 : REV A
|
Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications
|
ASTM F 1055 : 2016 : REV A
|
Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
|
ASTM F 2686 : 2014
|
Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe (Withdrawn 2023)
|
ASTM F 2905/F2905M : 2013
|
Standard Specification for Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings and Joints For Oil and Gas Producing Applications
|
ASTM D 2683 : 2014
|
Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
|
ASTM F 2159 : 2019
|
Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
|
ASTM F 2928 : 2018
|
Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods
|
ASTM F 1970 : 2019
|
Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
|
ASTM D 2737 : 2012 : REV A
|
Standard Specification for Polyethylene (PE) Plastic Tubing
|
ASTM D 6396 : 1999 : R2012
|
Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees
|
ASTM F 2390 : 2012 : R2017
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
|
ASTM D 6041 : 2018
|
Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
|
ASTM D 2467 : 2015
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
|
ASTM F 2619/F2619M : 2013
|
Standard Specification for High-Density Polyethylene (PE) Line Pipe
|
ASTM F 437 : 2015
|
Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
|
ASTM F 2807 : 2013 : R2018
|
Standard Specification for Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure Piping Applications
|
ASTM D 2239 : 2012 : REV A
|
Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
|
ASTM D 3299 : 2018
|
Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
|
ASTM F 2788/F2788M : 2019
|
Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe
|
ASTM F 1281 : 2017
|
Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
|
ASTM F 714 : 2013
|
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
|
ASTM D 1785 : 2015 : EDT 1
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
|
ASTM D 5685 : 2019
|
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
|
ASTM D 2846/D2846M : 2019 : REV A
|
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
|
ASTM F 645 : 2018 : REV B
|
Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
|
ASTM D 2241 : 2015
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
|
ASTM F 2785 : 2018 : REV A
|
Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
|
ASTM F 2818 : 2010 : R2014 : EDT 1
|
Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
|
ASTM F 2817 : 2013 : R2019
|
Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair
|
ASTM F 2945 : 2018
|
Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
|
ASTM F 442/F442M : 2013 : EDT 1
|
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
|
ASTM F 438 : 2017
|
Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
|
ASTM D 2609 : 2015
|
Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
|
ASTM D 2290 : 2019
|
Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
|
ASTM F 2854 : 2010 : R2016
|
Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
|
ASTM F 3346 : 2019
|
Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PERT/AL/PE-RT) Composite Pressure Pipe
|
ASTM D 4024 : 2015
|
Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
|
ASTM F 1282 : 2017
|
Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
|
ASTM D 5677 : 2017
|
Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
|
ASTM D 2996 : 2017
|
Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
|
ASTM F 3123 : 2018 : REV A
|
Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)
|
ASTM F 2767 : 2018
|
Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution
|
ASTM D 2513 : 2018 : REV A
|
Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
|
ASTM D 2992 : 2018
|
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
|
ASTM F 876 : 2019 : REV A
|
Standard Specification for Crosslinked Polyethylene (PEX) Tubing
|
ASTM F 877 : 2018 : REV A
|
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
|