ASTM C 266 : 2021
|
Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
|
ASTM C 192/C192M : 2019
|
Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
|
ASTM C 452 : 2021
|
Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
|
ASTM C 305 : 2020
|
Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
|
ASTM C 596 : 2018
|
Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
|
ASTM A 1096/A1096M : 2015
|
Standard Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement
|
ASTM C 157/C157M : 2017
|
Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
|
ASTM C 953 : 2017
|
Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
|
ASTM C 1105 : 2008 : REV A : R2016
|
Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
|
ASTM C 1019 : 2020
|
Standard Test Method for Sampling and Testing Grout for Masonry
|
ASTM D 8337/D8337M : 2021
|
Standard Test Method for Evaluation of Bond Properties of FRP Composite Applied to Concrete Substrate using Single-Lap Shear Test
|
ASTM C 1038/C1038M : 2019
|
Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
|
ASTM C 187 : 2016
|
Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
|
ASTM C 185 : 2020
|
Standard Test Method for Air Content of Hydraulic Cement Mortar
|
ASTM C 1567 : 2021
|
Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
|
ASTM C 359 : 2021
|
Standard Test Method for Early Stiffening of Hydraulic-Cement (Mortar Method)
|
ASTM C 1260 : 2021
|
Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
|
ASTM C 1757 : 2013
|
Standard Test Method for Determination of One-Point, Bulk Water Sorption of Dried Concrete (Withdrawn 2022)
|
ASTM C 887 : 2020
|
Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
|
ASTM D 7958/D7958M : 2017
|
Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test
|
ASTM G 109 : 2007 : R2013
|
Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
|
ASTM C 1713 : 2017
|
Standard Specification for Mortars for the Repair of Historic Masonry
|
ASTM C 780 : 2020
|
Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
|
ASTM C 1670/C1670M : 2021 : REV A
|
Standard Specification for Adhered Manufactured Stone Masonry Veneer Units
|
ASTM C 932 : 2006 : R2019
|
Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering
|
ASTM C 1749 : 2017 : REV A
|
Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
|
ASTM C 1140/C1140M : 2011 : R2019
|
Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
|
ASTM C 1707 : 2018
|
Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes
|
ASTM D 7705/D7705M : 2012 : R2019
|
Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction
|
ASTM C 441/C441M : 2017
|
Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
|
ASTM C 1708/C1708M : 2019
|
Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements
|
ASTM C 1437 : 2020
|
Standard Test Method for Flow of Hydraulic Cement Mortar
|
ASTM C 807 : 2021
|
Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
|
ASTM C 1222 : 2021
|
Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
|
ASTM C 31/C31M : 2021 : REV A
|
Standard Practice for Making and Curing Concrete Test Specimens in the Field
|
ASTM A 981/A981M : 2011 : R2016
|
Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
|
ASTM C 882/C882M : 2020
|
Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
|
ASTM C 1679 : 2017
|
Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
|
ASTM C 1012/C1012M : 2018 : REV B
|
Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
|
ASTM C 1738/C1738M : 2019
|
Standard Practice for High-Shear Mixing of Hydraulic Cement Pastes
|
ASTM C 191 : 2021
|
Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
|
ASTM C 125 : 2021 : REV A
|
Standard Terminology Relating to Concrete and Concrete Aggregates
|
ASTM C 1074 : 2019 : EDT 1
|
Standard Practice for Estimating Concrete Strength by the Maturity Method
|
ASTM C 1090/C1090M : 2015
|
Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
|
ASTM C 1328/C1328M : 2019 : REDLINE
|
Standard Specification for Plastic (Stucco) Cement
|
ASTM D 7913/D7913M : 2014 : R2020
|
Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
|
ASTM C 631 : 2009 : R2020
|
Standard Specification for Bonding Compounds for Interior Gypsum Plastering
|
ASTM D 1734 : 1993 : R2013
|
Standard Practice for Making Cementitious Panels for Testing Coatings
|
ASTM C 1329/C1329M : 2016 : REV A
|
Standard Specification for Mortar Cement
|
ASTM C 796/C796M : 2019
|
Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
|
ASTM C 1608 : 2017
|
Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste
|
ASTM C 87/C87M : 2017
|
Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
|
ASTM C 109/C109M : 2021
|
Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
|
ASTM C 1403 : 2015
|
Standard Test Method for Rate of Water Absorption of Masonry Mortars
|
ASTM C 1506 : 2017
|
Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
|
ASTM C 1792 : 2014
|
Standard Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes (Withdrawn 2023)
|
ASTM C 91/C91M : 2018
|
Standard Specification for Masonry Cement
|
ASTM C 151/C151M : 2018
|
Standard Test Method for Autoclave Expansion of Hydraulic Cement
|
ANSI/AWWA C300:2022+ADD:2023
|
Reinforced Concrete Pressure Pipe, Steel-Cylinder Type
|