ASME B16.18 : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Cast Copper Alloy Solder Joint Pressure Fittings (B16.18 - 2012)
Hardcopy , PDF
09-08-2019
English
01-01-2012
Foreword
Committee Roster
Correspondence With the B16 Committee
Summary of Changes
List of Changes in Record Number Order
1 Scope
2 General
3 Pressure-Temperature Ratings
4 Fitting Size and Ends
5 Marking
6 Material
7 Metal Thickness
8 Inspection Tolerance
9 Threaded Ends
10 Configuration of Threaded Ends
11 Production Testing
Mandatory Appendix
I - References
Nonmandatory Appendices
Nonmandatory Appendix A - Strength of Solder Joints
Nonmandatory Appendix B - Fitting Rating
Nonmandatory Appendix C - Quality System Program
Describes requirements for: (a) pressuretemperature ratings, (b) abbreviations for end connections, (c) sizes and method of designating openings of fittings, (d) marking, (e) material, (f) dimensions and tolerances, (g) tests.
DevelopmentNote |
Supersedes WW T 725 (07/2004)
|
DocumentType |
Revision
|
ISBN |
9780791833964
|
Pages |
64
|
PublisherName |
American Society of Mechanical Engineers
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
B214-16 | Installation code for hydronic heating systems |
ASME B16.22 : 2013 | WROUGHT COPPER AND COPPER ALLOY SOLDER-JOINT PRESSURE FITTINGS |
ASME A112.18.1 : 2012 : R2017 | PLUMBING SUPPLY FITTINGS |
MIL V 18436 : F | VALVES, CHECK, BRONZE, CAST IRON, AND STEEL BODY |
ASTM F 1380 : 1995 : REV A | Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing |
MIL-DTL-18436 Revision G:2017 | Valves, Check - Bronze -and Steel-Body |
MSS SP 25 : 2013 | STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
ASTM F 1974 : 2009 : R2015 | Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
MSS SP 80 : 2013 | BRONZE GATE, GLOBE, ANGLE, AND CHECK VALVES |
ASSE 1037 : 2015 | PERFORMANCE REQUIREMENTS FOR PRESSURIZED FLUSHING DEVICES FOR PLUMBING FIXTURES |
AWS BRH:2007 | BRAZING HANDBOOK |
ASME A112.4.14 : 2017 | MANUALLY OPERATED QUARTER-TURN SHUTOFF VALVES FOR USE IN PLUMBING SYSTEMS |
MSS SP 123 : 2013 | NON-FERROUS THREADED AND SOLDER-JOINT UNIONS FOR USE WITH COPPER WATER TUBE |
CSA B483.1 : 2007 | DRINKING WATER TREATMENT SYSTEMS |
ASTM F 1380 : 1995 : REV A : R2002 : EDT 1 | Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2008) |
ASTM B 828 : 2016 : REDLINE | Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings |
MSS SP 110 : 2010 | BALL VALVES THREADED, SOCKET-WELDING, SOLDER JOINT, GROOVED AND FLARED ENDS |
ASME PTB 2 : 2009 | GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
ASME B16.50 : 2013 | WROUGHT COPPER AND COPPER ALLOY BRAZE-JOINT PRESSURE FITTINGS |
CSA B483.1 : 2007 : INC : UPD 3 : 2017 : R201700 | DRINKING WATER TREATMENT SYSTEMS |
ASTM F 1139 : 1988 : R2010 | Standard Specification for Steam Traps and Drains |
A-A-59617 Base Document:2002 | UNIONS, BRASS OR BRONZE, THREADED PIPE CONNECTIONS AND SOLDER-JOINT TUBE CONNECTIONS |
AWWA C800 : 2014 | UNDERGROUND SERVICE LINE VALVES AND FITTINGS |
CSA B483.1 : 2007 : INC : UPD 3 : 2017 : R201200 | DRINKING WATER TREATMENT SYSTEMS |
NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
ASTM B 88 : 2016 : REDLINE | Standard Specification for Seamless Copper Water Tube |
CSA B483.1 : 2007 : R2012 | DRINKING WATER TREATMENT SYSTEMS |
ASTM F 1380 : 1995 : REV A : R2002 | Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing |
ASTM F 1139 : 1988 : R2015 | Standard Specification for Steam Traps and Drains |
ASME A112.18.6 : 2009 : R2014 | FLEXIBLE WATER CONNECTORS |
ASME B31.3:2016 | PROCESS PIPING |
MIL-DTL-20064 Revision F:2014 | VALVE, NONFERROUS, FOR USE WITH HALOGENATED REFRIGERANTS |
ASME B16.23 : 2016 | CAST COPPER ALLOY SOLDER JOINT DRAINAGE FITTINGS: DWV |
ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
ASTM F 1155 : 2010 | Standard Practice for Selection and Application of Piping System Materials |
CSA B483.1 : 2007 : INC : UPD 2 : 2007 : R2012 | DRINKING WATER TREATMENT SYSTEMS |
ASME B31.1 : 2016 | POWER PIPING |
ASSE 1070-2020/ASME A112.1070-2020/CSA B125.70 : 2015 | PERFORMANCE REQUIREMENTS FOR WATER TEMPERATURE LIMITING DEVICES |
MSS SP 106 : 2012 | CAST COPPER ALLOY FLANGES AND FLANGED FITTINGS: CLASS 125, 150, AND 300 |
MSS SP 116 : 2014 | SERVICE-LINE VALVES AND FITTINGS FOR DRINKING WATER SYSTEMS |
CSA B125.1:2012 | PLUMBING SUPPLY FITTINGS |
ASSE 1070 : 2015 | PERFORMANCE REQUIREMENTS FOR WATER TEMPERATURE LIMITING DEVICES |
MSS SP 139 : 2014 | COPPER ALLOY GATE, GLOBE, ANGLE, AND CHECK VALVES FOR LOW PRESSURE/LOW TEMPERATURE PLUMBING APPLICATIONS |
ASME A112.18.1 : 2012 | PLUMBING SUPPLY FITTINGS |
B125.3-18 | Plumbing fittings |
MSS SP 145 : 2013 | METAL BALL VALVES FOR LOW PRESSURE/LOW TEMPERATURE PLUMBING APPLICATIONS |
ASTM F 1974:2009 | Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
ASME A112.18.6 : 2009 | FLEXIBLE WATER CONNECTORS |
ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
ASTM F 1139 : 1988 : R1998 | Standard Specification for Steam Traps and Drains |
CSA B45.13 : 2014 | VACUUM WASTE-COLLECTION SYSTEMS |
ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
ASTM F 1139 : 1988 : R2004 | Standard Specification for Steam Traps and Drains |
CSA B125.37 : 2015 | PERFORMANCE REQUIREMENTS FOR PRESSURIZED FLUSHING DEVICES FOR PLUMBING FIXTURES |
AWS SHB : 3 | SOLDERING HANDBOOK |
NFPA 750 : 2015 | WATER MIST FIRE PROTECTION SYSTEMS |
MSS SP 88 : 2015 | DIAPHRAGM VALVES |
CSA B55.2 : 2015 | DRAIN WATER HEAT RECOVERY UNITS |
ASTM F 1155 : 2010 : R2015 | Standard Practice for Selection and Application of Piping System Materials |
ICC 2012 INTERNATIONAL BUILDING CODE : 2012 | INTERNATIONAL BUILDING CODE |
ICC IMC Code and Commentary : 2015 | IMC® Code and Commentary |
ASTM B 584 : 2014 : REDLINE | Standard Specification for Copper Alloy Sand Castings for General Applications |
ASME B16.15 : 2013 | CAST COPPER ALLOY THREADED FITTINGS: CLASSES 125 AND 250 |
ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
MSS SP 25 : 2013 | STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
ASTM B 88 : 2016 : REDLINE | Standard Specification for Seamless Copper Water Tube |
ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
ASTM B 828 : 2016 : REDLINE | Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
ASTM B 62 : 2017 : REDLINE | Standard Specification for Composition Bronze or Ounce Metal Castings |
ASME B16.3 : 2016 | MALLEABLE IRON THREADED FITTINGS: CLASSES 150 AND 300 |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.