EN 10253-1:1999
|
Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements
|
EN 12953-5:2002
|
Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler
|
EN ISO 8494:2013
|
Metallic materials - Tube - Flanging test (ISO 8494:2013)
|
EN 14394:2005+A1:2008
|
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
|
EN ISO 8493 : 2004
|
Metallic materials - Tube - Drift-expanding test (ISO 8493:1998)
|
EN 1515-1:1999
|
Flanges and their joints - Bolting - Part 1: Selection of bolting
|
EN 10051:2010
|
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
|
EN 10028-1:2017
|
Flat products made of steels for pressure purposes - Part 1: General requirements
|
EN 10213:2007+A1:2016
|
Steel castings for pressure purposes
|
EN 10028-3:2017
|
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
|
EN 10029:2010
|
Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
|
EN 1759-1:2004
|
Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
|
EN 1503-3:2000/AC:2001
|
VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 3: CAST IRONS SPECIFIED IN EUROPEAN STANDARDS
|
ISO/TR 15608:2017
|
Welding — Guidelines for a metallic materials grouping system
|
EN 1503-1:2000
|
Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards
|
EN 10216-2:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
|
EN 10025-1:2004
|
Hot rolled products of structural steels - Part 1: General technical delivery conditions
|
EN 10028-2:2017
|
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
|
PREN 12953-1 : DRAFT 2010
|
SHELL BOILERS - PART 1: GENERAL
|
EN 1515-2:2001
|
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated
|
EN 10217-2:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
|
EN 10222-2:2017
|
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
|
EN 10204:2004
|
Metallic products - Types of inspection documents
|
EN 10025-2:2004/AC:2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
|
EN 1563:2011
|
Founding - Spheroidal graphite cast irons
|
PREN 12953-3 : DRAFT 2013
|
SHELL BOILERS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS
|
EN 12074:2000
|
Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes
|
ISO 9000:2015
|
Quality management systems — Fundamentals and vocabulary
|
EN 10216-1:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
|
EN 1515-3:2005
|
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated
|
EN 10220:2002
|
Seamless and welded steel tubes - Dimensions and masses per unit length
|
EN 1092-2:1997
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
|
EN 764-4:2014
|
Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
|
EN 10253-2:2007
|
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
|
EN 10217-1:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
|
EN 10217-5:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
|
EN 13479:2017
|
Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
|
EN 1561:2011
|
Founding - Grey cast irons
|
EN 10222-1:2017
|
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
|
1997/23/EC : 1997
|
DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
|
PREN 12953-6 : DRAFT 2008
|
SHELL BOILERS - PART 6: REQUIREMENTS FOR EQUIPMENT FOR THE BOILER
|